Home Network Community > All Threads > BE800 Keeps rebooting
< All Threads

BE800 Keeps rebooting

12

BE800 Keeps rebooting

15 Reply
Re:BE800 Keeps rebooting
2024-09-12 13:19:00

  @Marvin_S 

 

Hi! thanks! 

 

Fiber Modem: Nokia SX-010X-Q 

  0  
  0  
#12
Options
Re:BE800 Keeps rebooting
2024-09-13 07:08:01

  @lolunix 

 

Got it, thanks~

Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode.
  0  
  0  
#13
Options
Re:BE800 Keeps rebooting
2024-10-16 15:09:06

  @lolunix 
 

I've had this problem with the BE550 (that I returned) and the BE800 that I have now.

 

I was rebooting almost every other hour (very annoying). I had the lasted firmware and contacted TP Link support. They gave me a beta firmware for the BE550, but I still had the issue.

 

I think I figured out what was causing the reboots/restarts which was to disable the MLO wifi network. I did this 2 days ago and my router hasn't rebooted/restarted since then.

 

Hope this helps!

  4  
  4  
#14
Options
Re:BE800 Keeps rebooting
a week ago

  @lolunix  I have been fighting with the BE800 since July 2024. 
Mesh support as claimed. Nope according to Tplink support My Tplink "mesh" devices are not supported . Even though they are clearly on the supported list and it says ON TH BOX Easymesh compatible. DHCP implementation is broken , I use a 192.168.1.30 to 192.168.4.252 /16 scope. So I use the 1.1 to 1.30 for static WAP / servers. ect. Well those are not valid IPS on my network so to fix it scope is 192.168.1.1 to 192.168.4.252 /16 then I have to use DHCP to reserve those IPS. Then I can go set them to static. 

I have 4 WAP all Tplink for compatibility, they each will randomly not allow nodes connecting to that specific WAP SSID to the internet. Even though looking at the IP settings the IP is correct, subnet mask , gateway / router is correct and DNS. Then it just starts working again.

I have had TPlink support on my network . They hve no clue ho to provide support. They had an L1 call me on phone (whom knew nothing about networking at all)  while another L3? got on my system poked around and said looks like it works to me. Even after I explained I basically put everything in a basic non mesh mode and changed the scope,  I had to force him to go look at the logs. When he finally did , he hit refresh ,,, LOL boom! crash, it does that all the time, 

This thing is sooo broken. Im going to be sending it back somehow. A netgear cheap router is more reliable than this thing.. Im done with it. Too many issues to even begin listing. Just an FYI, if any wifi 7 device logs into the wifi, done! They had me take all the new Apple iPhones off the network and my Galaxy 24-ultra.  The mesh will not work at all period. That was the last recommendation by support. Don't use the mesh!

 

 

  0  
  0  
#15
Options
Re:BE800 Keeps rebooting
a week ago

  @classic60 Holy wow, I had to come back to this to tell you THANK YOU... i had one mesh item left on the network, I've turned it off and literally EVERYTHING in the house is working better, not just the reboots. I had just resigned to the fact it was a way of life and rebooted every night. Since seeing this I've turned off the nightly reboots and its been amazing. Somehow the handoffs are even BETTER between my APs now that the mesh is off.. truly a livesaver and appreciate you finding this thread!! 

  1  
  1  
#16
Options
12
Related Articles
AX3200 keeps rebooting
472 0
BE800 not saving ofdma +mu mimo setting
6521 0
Archer A7 keeps rebooting
1201 0
Archer C8 keeps rebooting
2234 0
Archer C5400 keeps rebooting
2394 1
C8 V1 keeps rebooting
779 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.