I've had an "intermittant" issue with one of the Deco satellites since purchase but in the past it appeared to clear after some time.
However, it is recently re-appeared after a power loss (did some electrical work on the house) and after several solutions that worked in the past the satellite unit still reboots continually.  Currently at a loss on how to fix it this time.

Attempted fixes:

-- power off for over a minute and then allow it to reconnect.

-- remove from the "group", reset it and then re-add it 

I've done the above items several times over the past few days with no change in the device's behavior.

Also, I rebooted the entire mesh group (via the app) and also checked that I'm on the latest firmware for my hardware.

Any other suggestions to fix this issue?

I've no probems uploading log files.