Home Network Community > All Threads > I require the range extender to accept WPS2 only, is this possible to configure?
< All Threads

I require the range extender to accept WPS2 only, is this possible to configure?

I require the range extender to accept WPS2 only, is this possible to configure?

I require the range extender to accept WPS2 only, is this possible to configure?
I require the range extender to accept WPS2 only, is this possible to configure?
2024-06-28 17:12:44
Tags: #WPA2
Model: RE220  
Hardware Version: V3
Firmware Version: 1.0.23 build 230418

I have a Tesla wall connector that will only connect to WPA2 only, my home wifi is enabled for WPA2/WPA3, and this causes it to fail.

If I change my my wifi to WPA2 only some of my devices refuse to connect as it not secure, thus I need the WI-FI extender to create a network that will connect to WPA2 only, so that I can use that for the Tesla wall connector. Is it possible with any of the TCP Link Extenders, and if so what versions and firmware? 
I do not see any options for it in the one I had purchased.

 

 

  0      
 
  0      
 
#1
Options
3 Reply
Re:I require the range extender to accept WPS2 only, is this possible to configure?
2024-06-28 23:00:32

  @grep73 

 

Range Extenders adopt the security of the main/host device.  You best option would be to either use a Range Extender in AP mode or enable Guest Network on your router and set the security to WPA2 only.  If you go the Range Extender router you do need to make sure its phyiscally connected to the router. 

Check out the Latest: Recent Smart Home Features and Updates for Tapo and Kasa Securing Your TP-Link ID with 2FA:Deco and Tether | Smart Home Splash into a Smarter Summer with Sub-G Sensors, Matter, and Apple Home!
  0  
  0  
#2
Options
Re:I require the range extender to accept WPS2 only, is this possible to configure?
2024-06-29 00:03:32

  @Carl That worked, I have T-Mobile 5G Home Internet and didn't know that I could create a guest connection. But looked it up and it worked. 

 

Thank you

  1  
  1  
#3
Options
Re:I require the range extender to accept WPS2 only, is this possible to configure?
2024-07-01 14:15:25

  @grep73 

 

Awesome, glad to hear its working

 

Check out the Latest: Recent Smart Home Features and Updates for Tapo and Kasa Securing Your TP-Link ID with 2FA:Deco and Tether | Smart Home Splash into a Smarter Summer with Sub-G Sensors, Matter, and Apple Home!
  0  
  0  
#4
Options

Information

Helpful: 0

Views: 247

Replies: 3

Tags

WPA2
Related Articles
How should I configure the network name on my Range Extender?
95616 6
Faulty Range Extender
444 0
Range extender via ethernet
691 0
Range Extender with Google Router
524 0
Range extender is not connecting to 5g network.
5506 0
configuring range extender w/o brodcasting?
457 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.