Anyconnect VPN my company uses not working on Deco x20
Recently set up deco x20 mesh system but I can't connect to my works vpn when trying to work from home. It was working for a little bit when I connected using the guest network but that isn't working now either. Any help would be appreciated as im currently working using my mobile hotspot .
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@Vibes0227 Was it previously working via the modem you are using?
Are you running your Deco in Router or in AP mode?
- Copy Link
- Report Inappropriate Content
@yves_b Yes it was previously working with the modem I was using. Using deco in router mode
- Copy Link
- Report Inappropriate Content
@Vibes0227 Are the Deco connected to the modem? If yes, it is perhaps better to use the Deco in AP mode (at least to test).
- Copy Link
- Report Inappropriate Content
@yves_b what do you mean connected to the modem? Sorry I didn't understand. I have the main deco connected to the modem. The other 2 are connected through a wireless connection
- Copy Link
- Report Inappropriate Content
@Vibes0227 I wanted to know if the modem was still in use, or if it had been replaced by the Deco.
As the modem is still in use, I suggest setting the Operation Mode of the Deco to "Access Point".
- Copy Link
- Report Inappropriate Content
@yves_b OK I'll try that and report back
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 434
Replies: 6
Voters 0
No one has voted for it yet.