Reolink wifi cams

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Reolink wifi cams

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Reolink wifi cams
Reolink wifi cams
2024-05-05 22:29:54
Model: Archer AX10000  
Hardware Version: V1
Firmware Version:

Can't connect to reolink wifi cams .

I had a verizon cr1000a

I used the same  network name and password. 

There are multiple same name networks and can't tell what band they are on

I tried smart connect on and off, no difference 

 

  0      
  0      
#1
Options
6 Reply
Re:Reolink wifi cams
2024-05-05 23:41:16

  @Johnnydec1 

 

 

Many models of Reolink cams can operate on both bands.

I would suggest to turn off smart connect and name SSIDs differently.

Then reset the Reolink cam and re-add to the new router SSID.

 

 

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  0  
  0  
#2
Options
Re:Reolink wifi cams
2024-05-06 00:15:36
Name 2.4 and 5.0 different?
  0  
  0  
#3
Options
Re:Reolink wifi cams
2024-05-06 00:19:45

  @Johnnydec1 

 

Yes, this way you'll always know to which band a particular device is connected.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  0  
  0  
#4
Options
Re:Reolink wifi cams
2024-05-06 00:56:22
I see a setting that lets all networks see same passwords Should I disable it?
  0  
  0  
#5
Options
Re:Reolink wifi cams
2024-05-06 07:06:39

  @Johnnydec1 

 

You can use the same wireless password for all wireless bands - just use different SSIDs (smart connect off).

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  0  
  0  
#6
Options
Re:Reolink wifi cams
2024-05-06 10:48:29

  @Johnnydec1 Thank You I will try that .will post when I find out.

  0  
  0  
#7
Options