Home Network Community > All Threads > Archer AX1500 (AX12) resets wifi settings to default
< All Threads

Archer AX1500 (AX12) resets wifi settings to default

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Archer AX1500 (AX12) resets wifi settings to default

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Archer AX1500 (AX12) resets wifi settings to default
Archer AX1500 (AX12) resets wifi settings to default
2024-03-10 19:46:00 - last edited 2024-03-10 19:47:31
Model: Archer AX1500  
Hardware Version: V1
Firmware Version: 1.1.21 Build 20231127 Rel. 47645(4555)

My Archer AX12 (couple of months old) on the latest firmware is resetting the wifi settings to default after a power outage (or maybe even randomly can't be 100% sure).
 

The manual local IP settings (using it in AP mode) and menu password do not reset.

 

I have to reconfigure it to Smart mode, SSID name, etc and then it works as it should. There is an AX55 also in the same network as AP at the other side of the house (living room).
 

Is there a bad flash chip inside or a failing battery that helps retain the settings? I hope I won't have to return it and an update fixes it as I do not have time to waste with defective products.

  2      
 
  2      
 
#1
Options
5 Reply
Re:Archer AX1500 (AX12) resets wifi settings to default
2024-03-11 09:32:12

  @george1312 

 

Your current FW release was meant to resolve an issue with the AX12 in AP mode - details.

You could try to reset the AX12 to its factory defaults and re-configure from scratch then check if there's any improvement.

If this was helpful click on the arrow pointing upward to make it blue. If this solves your issue, click the star to make it blue and mark the post as a "Recommended Solution".
  1  
  1  
#2
Options
Re:Archer AX1500 (AX12) resets wifi settings to default
2024-03-11 10:12:01

yes I thought so too but unfortunately I have to reconfigure the router very often.

 

I will try a total reset and see what happens - I will report back to this thread.

 

thank you for your reply.

  0  
  0  
#3
Options
Re:Archer AX1500 (AX12) resets wifi settings to default
2024-03-20 07:55:45
Same problem. I have two identical AX1500 routers, one updated to the latest firmware version (1.1.21 Build 20231127 Rel 47645), the other not updated yet (keeps the factory firmware). The WiFi settings reset after power failure or reboot happens only with the updated one.
  1  
  1  
#4
Options
Re:Archer AX1500 (AX12) resets wifi settings to default
2024-03-20 08:17:27

  @MarceloGV 

 

For me a hard reset using the button (after updating to latest firmware) seems to have solved it. Still testing.

  0  
  0  
#5
Options
Re:Archer AX1500 (AX12) resets wifi settings to default
2024-03-20 10:25:58

  @MarceloGV 

 

Do a factory reset of the updated AX12 to its factory defaults and re-configure from scratch - then check if there's any improvement.

If this was helpful click on the arrow pointing upward to make it blue. If this solves your issue, click the star to make it blue and mark the post as a "Recommended Solution".
  0  
  0  
#6
Options

Information

Helpful: 2

Views: 1296

Replies: 5

Related Articles
Archer AX1500 IPv6 Not Working?
1420 0
Archer AX1500 Authentication Error (WIFI)
660 0
Archer AX1500 to wifi cable modem.
1598 0
Archer AX1500
1214 0
AX1500 resets even on UPS
492 0
WR841N resets to factory settings
1025 1
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.