Powerline Adapter Help
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
I'm considering the AV2000 pair for this situation, but have some questions. This is a new, finished construction home that unfortunately, doesn't have
any cable or Ethernet wire included in the walls. Currently, the ISP has installed a modem and WiFi 6 router in the basement.
I understand the basics of power-line adapters, my question is, if I get it to work on one branch can I install another pair on the other branch.
Currently, the router is sitting right next to the CB entry panel. This is a 2 story home. I also have a boxed mesh in storage.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Reading through this FAQ and judging by this statement:
"The HomePlug AV2 standard introduces new technology and features, allowing Powerline adapters to communicate as long as they are on the same main circuit (panel)."
I would assume that they would be able to communicate if they are on different "branches".
A bit earlier in the same FAQ:
"Q: Can several Powerline networks exist simultaneously in same power circuit?
A: Yes. The Powerline networks can be separated by different network names. About how to change the network name, it can be made by the pair button or attached Utility. However, the overall throughput is shared by the multiple networks, please be informed of this. Please refer to the FAQ 258 to change the Powerline network names."
Assuming that you could build a PLC network on different "branches" they could be on the same network.
I must say that I haven't tested that myself and can't confirm this assumption.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
There's really nothing there answering the question. I see many references to "circuits," what I'm referring to is "branches."
in the US, entry panels have 2 branches of 120V from the 240V feed from the utility. If a PLA is installed on any circuit on 1 branch,
the other circuits on that branch (no matter what circuit they service) should carry the signal.
That said, if another PLA is installed on the other branch, the entire house would be serviced, any PLA could be placed throughout the home
and receive signal. Question is, can the branches be on the same network or do they have to be separate?
- Copy Link
- Report Inappropriate Content
Reading through this FAQ and judging by this statement:
"The HomePlug AV2 standard introduces new technology and features, allowing Powerline adapters to communicate as long as they are on the same main circuit (panel)."
I would assume that they would be able to communicate if they are on different "branches".
A bit earlier in the same FAQ:
"Q: Can several Powerline networks exist simultaneously in same power circuit?
A: Yes. The Powerline networks can be separated by different network names. About how to change the network name, it can be made by the pair button or attached Utility. However, the overall throughput is shared by the multiple networks, please be informed of this. Please refer to the FAQ 258 to change the Powerline network names."
Assuming that you could build a PLC network on different "branches" they could be on the same network.
I must say that I haven't tested that myself and can't confirm this assumption.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 688
Replies: 3
Voters 0
No one has voted for it yet.