Firmware Recovery

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Firmware Recovery

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Firmware Recovery
Firmware Recovery
2023-09-23 23:30:17
Model: Deco X50  
Hardware Version: V1
Firmware Version:

so i have followed the uboot recovery directions for my deco x50 version 1.6 and i cannot get it into recovery. unit unplugged static ip set of 192.168.0.2 as suggested hold reset and then plug x50 in but i cannot get it to do anything except stay on solid yellow light and the firmware recovery page does not open it just times out. Is there a specific way to get this into recovery mode that maybe im missing?

  0      
  0      
#1
Options
1 Reply
Re:Firmware Recovery
2023-09-26 12:14:27

  @icehawk940 

Hi, Thank you very much for your time and patience.

Did it respond to a hardware reset by holding the reset pinhole for 1s?

Have you tried to swap the power adapter with another Deco X50 and also plug it into another power socket, then try to check again whether it could get into firmware recovery mode?

By the way, do you want to run a firmware recovery because the LED on Deco X50 is solid yellow all the time?

Wait for your reply and best regards.

  0  
  0  
#2
Options

Information

Helpful: 0

Views: 348

Replies: 1

Related Articles