TP-Link AC1200 WiFi Extenders in bridge mode?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

TP-Link AC1200 WiFi Extenders in bridge mode?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TP-Link AC1200 WiFi Extenders in bridge mode?
TP-Link AC1200 WiFi Extenders in bridge mode?
2023-09-15 16:15:00
Model: Range Extender  
Hardware Version:
Firmware Version:

Need to bridge the home wired network to a building 80 ft away.

 

Will these devices allow me to wirelessly bridge the two buildings together using 2 of these TP-Link WiFi extenders in "bridge" mode and use the wired network ports on each of them as trunks to a switch on each end?

 

Wired connection doesn't need to be a "trunk" in the traditional network sense. Just need to extend the existing home network. Same subnet everywhere. No vlan management needed.

  0      
  0      
#1
Options
1 Reply
Re:TP-Link AC1200 WiFi Extenders in bridge mode?
2023-09-26 03:30:13

  @Kangaroo1264 

Hi,

It is feasible to bridge the distance of 80 feet with two network extender, and you need to pay attention to the location of RE placement when arranging, try to place it evenly between two buildings, and to avoid obstacles such as walls, metal and so on, they will greatly reduce the signal strength

  1  
  1  
#2
Options

Information

Helpful: 0

Views: 604

Replies: 1

Related Articles