Home Network Community > All Threads > 100Mb/s
< All Threads

100Mb/s

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

100Mb/s

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
100Mb/s
100Mb/s
2023-09-13 17:31:48
Tags: #Bandwidth Control/QoS
Model: Archer AX1800  
Hardware Version: V1
Firmware Version: 1.3.8 Build 20230830 rel.19767(4555)

Godd afternoon.

I have a NAS connected to a router AX1800 24/7. However, every time I turn on my main computer, the Ethernet connection is limited to 100 Mbps instead of the expected 1000 Mbps. Interestingly, this issue is resolved when I disconnect and then reconnect the Ethernet cable. QoS is disconected.

 

Cheers.

  0      
 
  0      
 
#1
Options
5 Reply
Re:100Mb/s
2023-09-14 00:38:48

  @Bertu,

I would first take a look at the negotiated settings in your network adapter properties. When speeds are limited to that extent, I always assume that the negotiation failed and it chose a lower speed. Reconnecting the ethernet cable would force the connection to take place again.

 

You may consider trying to force your PC's network adapter to use 1000Mbps Full Duplex if it shows differently.

 

You may actually try to configure your QoS with a speed that is above what you expect from your ISP. This sometimes provides a smoother experience than having no QoS or prioritized devices.

Check out the Latest: Getting Started with EasyMesh and TP-Link New Tablet Mode for the Tapo App Comparing the Latest Tapo Doorbells
  1  
  1  
#2
Options
Re:100Mb/s
2023-09-14 23:41:11

  @Bertu 

Another thing to try is replacing the ethernet cable. 100 uses four wires and faster requires eight wires connected. Your cable or connecter may be going bad. 

  1  
  1  
#3
Options
Re:100Mb/s
2023-09-28 15:18:30

  @Bertu It was motherboard lan card fault and not the router.
Sorry for making you losing time, and thank you.

  0  
  0  
#4
Options
Re:100Mb/s
2023-09-29 00:58:55

  @Bertu 

No problem. Thanks for posting the solution as it may help others. 

  0  
  0  
#5
Options
Re:100Mb/s
2023-10-15 07:27:19

  @ArcherC8 yes it was that, the cable.

  0  
  0  
#6
Options

Information

Helpful: 0

Views: 505

Replies: 5

Tags

Bandwidth Control/QoS
Related Articles
Have 600MB but only get 100MB?
6171 0
500Mb/s with 100Mb/s port
723 0
Powerline LED is RED, but I get 100mb
358 0
C7 ac1750 v1 lan 100mb
1284 0
Deco M5 backhaul speed capped at 100MB
3992 0
100Mb between 2.5Gb port on Archer AXE300 and TL-SG108-M2
337 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.