Home Network Community > All Threads > Using Deco M4 Ethernet Port for Internet Use
< All Threads

Using Deco M4 Ethernet Port for Internet Use

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Using Deco M4 Ethernet Port for Internet Use

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Using Deco M4 Ethernet Port for Internet Use
Using Deco M4 Ethernet Port for Internet Use
2023-03-03 20:42:37
Model: Deco M4  
Hardware Version: V3
Firmware Version: 1.5.0 Build 20210414 Rel. 58075

Hello Friends,

 

I have configured x2 deco devices in my network. One of is connected to my modem (named deco1) , another one (named deco2) which is in my living room connected well. But I would like to connect my laptop via ethernet in the living room.

 

When I connect my laptop to deco 2 , I cant get any Ip from the device. Is that possible configuration to get Internet connection via ethernet on deco2?

 

Can you explain is there any trick ?

  0      
 
  0      
 
#1
Options
2 Reply
Re:Using Deco M4 Ethernet Port for Internet Use
2023-03-06 03:39:37

  @tkeskinbora 

Hi, welcome to the community.

Do you mean a network topology like this:

ISP modem----<cable>---main M4)))--WiFi--((( living room M4 #2----<cable---Laptop

It should work.

 

If not, please check whether you have enabled IPTV on the satellite Deco 2 under Deco APP>More>Advanced>IPTV/VLAN.

For more suggestions, please have a look at this link:

Ethernet not working on deco

Best regards.

▶Check What's Currently Going on With Deco ▶Deco Starts Supporting Changing Wireless Channels! ▶Deco X50-5G-V1-1.2.0 Supports WireGuard VPN, Hybrid Mesh and More Try to leave a Message if urgent help is required.
  0  
  0  
#2
Options
Re:Using Deco M4 Ethernet Port for Internet Use
2023-03-11 13:16:47

David-TP wrote

  @tkeskinbora 

Hi, welcome to the community.

Do you mean a network topology like this:

ISP modem----<cable>---main M4)))--WiFi--((( living room M4 #2----<cable---Laptop

It should work.

 

If not, please check whether you have enabled IPTV on the satellite Deco 2 under Deco APP>More>Advanced>IPTV/VLAN.

For more suggestions, please have a look at this link:

Ethernet not working on deco

Best regards.

  @David-TP

Hello, it does not work ,while the network topology is like you mentioned. I would like to connect my laptop via ethernet on living room m4 #2 ethernet.

How can I find the dhcp ip pool on living room m4#2 ? If I find the ip address pool , I will give an ip address manually on my laptop. 

 

Thank you,

 

  0  
  0  
#3
Options

Information

Helpful: 0

Views: 318

Replies: 2

Related Articles
The issue over Ethernet backhaul on deco m4
439 0
DECO M4 Backup
933 0
3 Deco M4 satellites disconnect from main M4 every few minutes, all on Ethernet via TL-SG108
759 3
M4 Port Limitations
449 0
Deco X55 Ethernet port
3197 2
Is the Ethernet port on M5 Deco a 1GBS port?
984 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.