Home

Forums

Stories

Knowledge Base

Home Network Community > All Threads > Change 'Partition' of USB Drive

< All Threads

Change 'Partition' of USB Drive

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Change 'Partition' of USB Drive

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Alonzo_Mosley

2022-09-24 01:45:14

Posts: 6

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2020-08-18

Change 'Partition' of USB Drive

2022-09-24 01:45:14

Tags: #USB Sharing

Model: Archer AX73

Hardware Version: V1

Firmware Version: 1.2.1 Build 20220316 rel.35540(5553)

My USB drive shows up in the router's page as "Drive Name(G:)".

Can I change that "(G:)"?

Because it shows up in Explorer as "\\SHARENAME\g\".

When I had the same drive plugged into my previous TP Link Archer 6, it addressed as "\\SHARENAME\sda1\". And I had plenty of devices that were mapped to that address. To remap is a ton of work! Would be so much easier if I could change the "g" to "sda1".

Any thoughts?

Thanks,

1 Reply

IrvSp

LV5

2022-09-25 15:54:56

Posts: 1524

Helpful: 596

Solutions: 28

Stories: 0

Registered: 2019-09-12

Re:Change 'Partition' of USB Drive

2022-09-25 15:54:56

@Alonzo_Mosley

I may not be that much help, I've switched using an Archer A20 to an AX55 and both used G:, I did move from a Netgear that was different though, but I have no shares set, I access what I need via File Manager or in programs.

I can 'think' of a way, but not sure it would work? Use the HOSTS file to redirect the one with 'G' to 'sda1'?

This assume all the devices connect via windows?

Possible it could be 'hacked' into the firmware but I wouldn't try that?

Alonzo_Mosley

2022-09-24 01:45:14

Posts: 6

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2020-08-18

Information

Helpful: 0

Replies: 1

Change 'Partition' of USB Drive

Change 'Partition' of USB Drive

Information

Voters 0

Tags