Home Network Community > All Threads > AX 1800 not detecting WAN connection (no lights on modem)
< All Threads

AX 1800 not detecting WAN connection (no lights on modem)

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

AX 1800 not detecting WAN connection (no lights on modem)

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
AX 1800 not detecting WAN connection (no lights on modem)
AX 1800 not detecting WAN connection (no lights on modem)
2022-08-23 22:49:32 - last edited 2022-08-23 22:50:55
Tags: #WAN
Model: Archer AX1800  
Hardware Version: V3
Firmware Version:

After working for a day, the router has decided to stop detecting my modem's WAN cable. The modem lights for the connection won't pop up when I plug it in, but when I plug my  PC directly into the modem it works just fine. When I plug the cable in, it allows me to pull up the TPLink setup page to manage the router, but doesn't actually transmit internet. 

Things I've tried over the last day:

 

Reseting my computer/modem/router

 

Changing the dynamic ISP to a static ISP

 

Changing internet speed to 1,000 Mbps from the router page

 

Changing the DNS address to 8.8.8.8 and 8.8.4.4, respectively

 

Changing the mode off of and back to "bridge" from the router page

 

Changing out at least 4 LAN cables, all of which are the proper type

 

Both updating and rolling back the firmware (currently on 1.1.1)

 

Cloning the MAC address. 

 

 

I'm really reaching my wits end on this one guys. My auto detection IP settings are all at 0.0.0.0

 

  0      
 
  0      
 
#1
Options
3 Reply
Re:AX 1800 not detecting WAN connection (no lights on modem)
2022-08-23 23:31:58
Suspect you are but getting an IP address from your modem. See the very first post for the solution.
  0  
  0  
#2
Options
Re:AX 1800 not detecting WAN connection (no lights on modem)
2022-08-25 00:36:55

  @ArcherC8 

 

Just attempted that, unfortunately no dice. The connection lights on the back of the modem are still off 

  0  
  0  
#3
Options
Re:AX 1800 not detecting WAN connection (no lights on modem)
2022-08-25 07:53:12

@ScribeSlendy 

 

Can I confirm who is your ISP, and what is the Connection Type provided by them, is it Dynamic or Static?

 

What if you connect the modem LAN to the LAN of the AX1800, will the modem detect the AX1800? 

 

To assist and figure it out efficiently, I've forwarded your case to the TP-Link support engineers who will contact you with your registered email address later. Please pay attention to your email box for follow-up. Thank you.

 

 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#4
Options

Information

Helpful: 0

Views: 1007

Replies: 3

Tags

WAN
Related Articles
Archer ax 1800
172 0
AX-1800 Loses Configuration
397 0
Archer AX-1800: How can I use my USB scanner with the USB port on my AX-1800
811 0
AX 1800 LED Controller 1093 WAN Off, then On latency/buffering issues
1220 0
AX 1800 Parental Control - Block WebSites
597 0
TP LINK AX 1800 Modem Frequent Disconnections
429 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.