My laptop with Archer T2U Nano cant connect to AX72 5ghz TP-Link - Technical Support

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

My laptop with Archer T2U Nano cant connect to AX72 5ghz TP-Link - Technical Support

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
My laptop with Archer T2U Nano cant connect to AX72 5ghz TP-Link - Technical Support
My laptop with Archer T2U Nano cant connect to AX72 5ghz TP-Link - Technical Support
2022-08-22 10:39:08 - last edited 2022-08-22 15:08:08
Model: Archer AX72  
Hardware Version: V1
Firmware Version:

Can you guys suggests some solution?

-the laptop is running linux and it was able to connect on my old AC router 5g just fine.

-the laptop can connect to 2.4ghz but of course I want it on 5ghz.

- I updated the firmware to latest as soon as I unboxed the ax72.

- Whenever I try to connect to 5ghz after entering the password it's keep asking me for password in a loop.

 

My 5ghz setting

 

channel 48

80mhz

 

 

  0      
  0      
#1
Options
2 Reply
Re:My laptop with Archer T2U Nano cant connect to AX72 5ghz TP-Link - Technical Support
2022-08-22 17:24:17

  @ttx99,

When the computer is asking for the password in a loop, is there any additional information given? Such as being an incorrect password?

 

It could be possible that you have different passwords for the two networks. Otherwise, I would recommend forgetting the old network and trying to reconnect to the network after restarting the computer. The laptop may be trying to connect using credentials from the old network, which may be causing the issue. 

  0  
  0  
#2
Options
Re:My laptop with Archer T2U Nano cant connect to AX72 5ghz TP-Link - Technical Support
2022-08-23 11:29:31 - last edited 2022-08-23 11:45:14

ttx99 wrote

Can you guys suggests some solution?

-the laptop is running linux and it was able to connect on my old AC router 5g just fine.

-the laptop can connect to 2.4ghz but of course I want it on 5ghz.

- I updated the firmware to latest as soon as I unboxed the ax72.

- Whenever I try to connect to 5ghz after entering the password it's keep asking me for password in a loop.

 

My 5ghz setting

 

channel 48

80mhz

 

 

  @Riley_S  I reformated (fresh install of Linux Mint) my laptop still cant connect only on 5ghz.

my previous distro was Manjaro I installed the follow ing drivers from https://github.com/aircrack-ng/rtl8812au and https://github.com/morrownr/8812au.

 

Same for Linux Mint, but it was actually able to connect for a while after the fresh install but right after I rebooted 5ghz dropped and now I cant connect.

 

d8dba44272224e21bd0a577c51f413d4

That's all my connection I just changed my ssid.

 

72bfb91f418d46449e9e17da46cb27a1

this is when it tries to connect to 5ghz. Stuck at configuring connection then ask for password again.

 

82dd91585f074ee8aae0fb8119f22fb5

 

then it asks for pw again. 2ghz and 5ghz has the same password.

  0  
  0  
#3
Options

Information

Helpful: 0

Views: 484

Replies: 2

Related Articles