Home Network Community > All Threads > After update, on M9 satellite unit will not connect
< All Threads

After update, on M9 satellite unit will not connect

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

After update, on M9 satellite unit will not connect

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
After update, on M9 satellite unit will not connect
After update, on M9 satellite unit will not connect
2021-11-15 03:09:58 - last edited 2021-11-19 03:37:58
Model: Deco M9 Plus  
Hardware Version: V2
Firmware Version: 1.51

Just updated my Decos and now one of the three will no longer connect to the others.  I tried moving it next to the main one, no luck.  I tried making it the main Deco but it flashes red and will not connect at all.  My guess is a bad firmware update?  I don't know. 

 

I've also tried to reset the Deco with the button on the bottom,  It does nothing.  Still flashing red.

 

How do I fix this?

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:After update, on M9 satellite unit will not connect-Solution
2021-11-19 02:48:15 - last edited 2021-11-19 03:37:58

I got it to work, using the web browser interface instead of the Tftpd64 app.

 

Recommended Solution
  1  
  1  
#4
Options
3 Reply
Re:After update, on M9 satellite unit will not connect
2021-11-16 02:03:32

@toecheese 

Hi,

It is suggested that you could run a firmware recovery on this unit, then we might have the chance to flashback to the old firmware to see whether it helped:

 

Deco Monthly Recap- Check What's Currently Going on With Deco KidShield Test Recruitment, Share Your Ideas With us! Wi-Fi Schedule Ideas Wanted!
  0  
  0  
#2
Options
Re:After update, on M9 satellite unit will not connect
2021-11-18 19:57:20
I've tried this, it does nothing (recovery does not start). I've tried it multiple times on two different computers, using several different cables,
  0  
  0  
#3
Options
Re:After update, on M9 satellite unit will not connect-Solution
2021-11-19 02:48:15 - last edited 2021-11-19 03:37:58

I got it to work, using the web browser interface instead of the Tftpd64 app.

 

Recommended Solution
  1  
  1  
#4
Options

Information

Helpful: 0

Views: 756

Replies: 3

Related Articles
Satellite unit failing?
619 0
New m9 plus deco unit not accepting connections - older firmware
963 0
Rename satellite unit
129 0
M9 Plus Satellite All of A Sudden Spotty Connection
424 0
4th Unit will not connect as a satellite
327 0
One Deco M9 Satellite is going yellow, losing Connection
741 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.