Archer C5400 not getting 1000Mbps

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Archer C5400 not getting 1000Mbps

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Archer C5400 not getting 1000Mbps
Archer C5400 not getting 1000Mbps
2021-11-03 18:24:48
Model: AC500  
Hardware Version: V2
Firmware Version: 1.2.5 Build 20190411 Rel.52981(5553)

We just got 1Gbps fiber internet and it seems like the C5400 can't handle it! I'm guessing there's some tweak that needs to be done, but here is the lowdown (all values given are in Mbps):

 

Direct connection from modem to PC (bypassing the router) -

943 Up // 897 Down

 

Modem to router using speedtest on router interface -

402 Up // 140 Down

 

Modem to router to LAN connected device - 

212 Up // 133 Down

 

Modem to router to wireless device -

78 Up // 41 Down (similar on all bands)

 

As you can see, the router throttles the bandwidth by well over half. I have QOS off and app priority set to normal. I've also set a manual max speed of 999Mbps up and down, but there has been no change. 

 

The cable is good, I'm using the same cable I used between the router and modem that I did between the modem and PC so it's definately the router. 

 

Can anyone suggest settings that may improve my throughput on LAN and wireless?

  0      
  0      
#1
Options
2 Reply
Re:Archer C5400 not getting 1000Mbps
2021-11-04 07:26:57

@Nciolli 

 

Try updating the router firmware to the latest version, then restore to factory defaults if necessary:

https://www.tp-link.com/us/support/download/archer-c5400/#Firmware

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router Archer BE800 New Firmware Added Support for EasyMesh in AP Mode, DoH&DoT, and 3-Band MLO Connection Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#2
Options
Re:Archer C5400 not getting 1000Mbps
2021-11-04 17:14:58

@Kevin_Z Thanks Kevin, I updated the firmware and reset to factory settings. It did not make much of a difference. Speeds at the router are still around 490Mbps and wireless is now down to 18 Down and 9 Up. Any other ideas?

  0  
  0  
#3
Options

Information

Helpful: 0

Views: 815

Replies: 2

Related Articles