Home Network Community > All Threads > Is it possible to disable wifi completely on the Deco W3600?
< All Threads

Is it possible to disable wifi completely on the Deco W3600?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Is it possible to disable wifi completely on the Deco W3600?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Is it possible to disable wifi completely on the Deco W3600?
Is it possible to disable wifi completely on the Deco W3600?
2021-10-03 10:01:59 - last edited 2021-10-08 05:57:54
Model: Deco W3600  
Hardware Version: V16
Firmware Version: 1.5.0 Build 20210121 Rel. 55167

I was told that if you use a router as an Access Point, that you don't need the wifi turned on from that device, cause right now I have 2 networks, one from the Deco, and one from my router/gateway. On the app though, it won't let me disable both bands, says to keep one on:

 

 

And since you can't change the channels/bandwidth on the Deco's, what the networks like is:

 

 

Can that setup there possibly cause clashing/interference with my main network?

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:Is it possible to disable wifi completely on the Deco W3600?-Solution
2021-10-03 22:02:23 - last edited 2021-10-08 05:57:54

@GWARslave119 

The device that you should disable would be the Arris gateway/router. I have the BGW210 model, and have disabled the wifi on it. My Decos are running AP mode and doing fine.

 

Your other question about whether the two are interfering looks to be 'no'. The BGW320 is on ch 6 (2.4GHz) while your Deco chose ch 8. There is some overlap, but unless you live in an isolated neighborhood of 5 acre lots you won't ever avoid that in 2.4G. On 5GHz your Deco is ch 44 and the BGW320 is ch 36 and 161. I see no conflicts there.

Recommended Solution
  0  
  0  
#2
Options
3 Reply
Re:Is it possible to disable wifi completely on the Deco W3600?-Solution
2021-10-03 22:02:23 - last edited 2021-10-08 05:57:54

@GWARslave119 

The device that you should disable would be the Arris gateway/router. I have the BGW210 model, and have disabled the wifi on it. My Decos are running AP mode and doing fine.

 

Your other question about whether the two are interfering looks to be 'no'. The BGW320 is on ch 6 (2.4GHz) while your Deco chose ch 8. There is some overlap, but unless you live in an isolated neighborhood of 5 acre lots you won't ever avoid that in 2.4G. On 5GHz your Deco is ch 44 and the BGW320 is ch 36 and 161. I see no conflicts there.

Recommended Solution
  0  
  0  
#2
Options
Re:Is it possible to disable wifi completely on the Deco W3600?
2021-10-05 03:43:52

@Don.M 

 

I went ahead and shut both bands off on the gateway...

 

There is one problem though, my step-dad has an older laptop with win7...it can detect the Deco's wifi but can't connect to it, no idea why. Looks like I'll leave one of the bands open on the gateway, otherwise he'll get quite annoyed heh.

  0  
  0  
#3
Options
Re:Is it possible to disable wifi completely on the Deco W3600?
2021-10-05 03:52:59

It could either be the bandwidth (Deco is probably using multiple channels, some older devices can't handle that) or the security setting (WPA vs WPA2). Try the security setting to see if that will allow it to connect. It is in Advanced / Wi-Fi / Security / Security, and you would want WPA2-PSK [AES] + WPA-PSK [TKIP]. If that doesn't do it you might need help from TP-Link.

  2  
  2  
#4
Options

Information

Helpful: 0

Views: 1099

Replies: 3

Related Articles
Allow users with Ethernet backhaul to disable WiFi backhaul completely
145 1
Is it possible to disable port 137 connection attempts on the AX1500?
1864 1
Disable Wifi radios
676 1
Disable WiFi backhaul
504 1
Is this possible????
665 0
AX6000, Disable Wifi 6
4387 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.