Home Network Community > All Threads > Cannot access 192.x.x.x public IP addresses
< All Threads

Cannot access 192.x.x.x public IP addresses

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Cannot access 192.x.x.x public IP addresses

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Cannot access 192.x.x.x public IP addresses
Cannot access 192.x.x.x public IP addresses
2021-04-27 16:24:36 - last edited 2021-04-28 17:02:47
Model: Deco X60  
Hardware Version: V2
Firmware Version: 1.5.1 Build 20210204 Rel. 50164

I've run a problem with my wifi mesh. For some reason I can't reach any public IP-addresses which uses 192.x.x.x public address space. For instance 192.229.221.185 (cs1227.wpc.alphacdn.net) is unreachable. I've a mobile router in bridged mode and Deco X60 in router mode. If I use directly the bridged connection I can reach those sites so the problem must be with Deco setup. My LAN IP is 192.168.68.1 (255.255.255.0) if that plays any role. Have someone else run to this issue or do anyone have hints how I can get the setup working. One solution is to use mobile router in router mode and deco in AP mode but I would like to get it working also like I've configured now.

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:Cannot access 192.x.x.x public IP addresses-Solution
2021-04-28 15:40:39 - last edited 2021-04-28 17:02:47

@nevalaa 

 

Have you tried changing the LAN IP scheme for the Deco to something else like 10.0.0.x or 172.16.x.x?

Recommended Solution
  1  
  1  
#4
Options
7 Reply
Re:Cannot access 192.x.x.x public IP addresses
2021-04-27 19:45:03

@nevalaa 

I have a Deco M9 plus setup sitting behind ATT Arris router (192.168.1.254) on fiber. The Deco is in router mode at 192.168.68.1. I just pinged the address you posted (192.229.221.185); I'm guessing the problem is the mobile router since you say your Deco is using a mask of 255.255.255.0.

  0  
  0  
#2
Options
Re:Cannot access 192.x.x.x public IP addresses
2021-04-28 10:17:31

@Don.M 

 

When I try the same with my laptop using ethernet cable directly connected to mobile router (i.e. replacing deco) I can ping those addresses so my suspicion is that the problem is somehow with deco setup.

  0  
  0  
#3
Options
Re:Cannot access 192.x.x.x public IP addresses-Solution
2021-04-28 15:40:39 - last edited 2021-04-28 17:02:47

@nevalaa 

 

Have you tried changing the LAN IP scheme for the Deco to something else like 10.0.0.x or 172.16.x.x?

Recommended Solution
  1  
  1  
#4
Options
Re:Cannot access 192.x.x.x public IP addresses
2021-04-28 17:06:16

@Tony 

 

That did the trick. Thanks. The root cause is still unresolved as the earlier setup should work as well. But I can live this solution.

  0  
  0  
#5
Options
Re:Cannot access 192.x.x.x public IP addresses
2021-05-06 06:59:14

@nevalaa I believe you could use 192.168.x.x.  192.x.x.x is a public IP address.

  0  
  0  
#6
Options
Re:Cannot access 192.x.x.x public IP addresses
2021-05-06 08:54:52

@Summest 

 

I'm not sure if I understood your comment correctly, but my lan IP was earlier 192.168.8.1 and the setup didn't work. Once I changed my lan IP to 10.0.0.1 all started to work. 

 

  0  
  0  
#7
Options
Re:Cannot access 192.x.x.x public IP addresses
2021-05-07 04:33:59
Sorry. The subject line threw me off. I have always used 192.168.x.x, even on TP Link devices.
  0  
  0  
#8
Options

Information

Helpful: 0

Views: 1779

Replies: 7

Related Articles
Need list of assigned IP Addresses
537 0
Device IP addresses
1354 0
Allowing Guest devices to access some but not all IP addresses on network
1756 0
Cannot acces surveillance NVR through public ip on wifi but from other networks outside
984 0
Cannot access router
753 0
How to forward if my public ip is different from WAN ip on router
1982 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.