Archer C5400X WAN Aggregration with two internet services
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hello all,
I have an Archer C5400X Wifi Router. I have a connection to a Mediacom Cable service via a Arris SB8200 via Direct Cable. I also have a DSL Service from Century Link and tried to set up the modem for WAN Aggregation. I want to use one service as a fail over for the Mediacom. However I am not seeing any failover. Once Mediacom had an outage and I lost all internet connectivity. What is any am I missing in the settings?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
This is a FAQ that shows how to set up link backup on the TL-R600VPN: https://www.tp-link.com/us/support/faq/2133/
You can leave the C5400X connected to the R600VPN and use the C5400X as you normally would as a router.
We also have a business support team if you would like to talk to them for other ideas: (link) Select "Business Product Support"
- Copy Link
- Report Inappropriate Content
The WAN aggregation does not have a failover feature, mainly meant for ISPs that provide more than 1 Gbps speeds where you have two Etherent cables going to the same modem.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
This is a FAQ that shows how to set up link backup on the TL-R600VPN: https://www.tp-link.com/us/support/faq/2133/
You can leave the C5400X connected to the R600VPN and use the C5400X as you normally would as a router.
We also have a business support team if you would like to talk to them for other ideas: (link) Select "Business Product Support"
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
If you disable the DHCP server you would then need to statically assign connected devices to the R600VPN an IP which may be cumbersome.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 1318
Replies: 5
Voters 0
No one has voted for it yet.