Archer vr600 - Error code 1 after rebooting router. I suspect it's an ip collision
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Archer vr600 - Error code 1 after rebooting router. I suspect it's an ip collision
Model:
Archer VR600
Hardware Version: V2
Firmware Version: 0.2.0 0.9.1 v0074.0 Build 170504 Rel.68210n
I use ip address reservation, and I noticed that if the ip range that can be assigned automatically may overlap ip addresses I reserve I get error 1 when rebooting the router.
So I changed the DHCP pool to be from 192.168.1.1 - 192.168.1.149 and all of my reserved addresses starts from 1.9.168.1.150 and on
This worked for a while but sometimes after rebooting the router I still get error 1. I still suspect that the router assigns the same ip twice for 2 different clients resulting in this error.
When this error comes, I can't do anything in the LAN settings page since nothing loads there, the clients list is empty which makes me believe my suspicious is true
