Home Network Community > All Threads > AX20 gives only 25% of the full speed!!
< All Threads

AX20 gives only 25% of the full speed!!

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

AX20 gives only 25% of the full speed!!

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
AX20 gives only 25% of the full speed!!
AX20 gives only 25% of the full speed!!
2020-10-06 09:55:37
Model: Archer AX20  
Hardware Version: V1
Firmware Version: 1.1.0 Build 20200326 rel.63489

Hello everyone,

 

I just got my AX20 Archer AX1800 today (Hardware Version: Archer AX20 v1.20, and Firmware is up to date) but when I use the Ethernet using Cat 6 cable it only gives me around 250 Mbps where my full speed from my Fiber plan is 1 Gbps.

That's not even 30% of the full speed!!!

 

Also, wireless connection using iPhone 11 PRO gives me higher speed than wired connection but still not even 40% of the full speed.

 

I got around 300 Mbps using the iPhone 11 pro with:

 

5Ghz

Channel Width: 80 HMz (the highest)

Channel: 157 

Mode: 802.11a/n/ac/ax Mixed

 

Internet Connection Type: Dynamic IP.

Internet Port Negotiation Speed Setting: 1000Mbps Full Duplex. 

 

Both wired and wireless speed are way slower than they should!

 

Any suggestions?

 

Thank you!

  0      
 
  0      
 
#1
Options
7 Reply
Re:AX20 gives only 25% of the full speed!!
2020-10-06 17:24:01

@Yosef11 

 

Are you using QOS?  If so, disable it and reboot the router.  QOS is really only needed for lower bandwidth services like those below 300 Mbps.  In some cases due to chipset it can actually hamper the performance of the router.  While I do not know if that is the case here please try this and let us know the results. 

Check out the Latest: Recent Smart Home Features and Updates for Tapo and Kasa Securing Your TP-Link ID with 2FA:Deco and Tether | Smart Home Splash into a Smarter Summer with Sub-G Sensors, Matter, and Apple Home!
  0  
  0  
#2
Options
Re:AX20 gives only 25% of the full speed!!
2020-10-06 17:34:12 - last edited 2020-10-06 17:36:03

@Carl 

 

Hey Carl,

 

No. QoS is not enable, I'm not using it.

  0  
  0  
#3
Options
Re:AX20 gives only 25% of the full speed!!
2020-10-06 17:47:43
Did you get the rated speeds on your old router? By chance are you using a VPN as that affects speed also. Be sure you are using Cat 5e or Car 6 Ethernet cable. Even so, try a different Ethernet cable.
  0  
  0  
#4
Options
Re:AX20 gives only 25% of the full speed!!
2021-01-29 16:48:18

@Yosef11 Hi mate!

I have the same problem, did you find any solution for that?

  0  
  0  
#5
Options
Re:AX20 gives only 25% of the full speed!!
2022-01-09 22:04:12

@Yosef11 

Hey,

I have the exact same issue (going crazy over it)

the thing is it's happen only on my Apple TV's (have 2)

it started when I switched to the Archer ax20!

any advice that you can give me?

  0  
  0  
#6
Options
Re:AX20 gives only 25% of the full speed!!
2022-06-04 04:30:58

  @Yosef11 

 

I have the same problem...package is 500mbps but getting 200mbps.. but when i use ISP provided router i get 480mbps (wired)..

  0  
  0  
#7
Options
Re:AX20 gives only 25% of the full speed!!
2022-09-08 10:13:04

  @Yosef11 

 

I have the exact same issue

 

  0  
  0  
#8
Options

Information

Helpful: 0

Views: 1983

Replies: 7

Related Articles
Archer AX20 can not be accessed
768 0
Archer AX20 OneMesh availablity
2389 0
AX20 firmware question
613 0
TP LINK AX20 AX1800
367 0
Will AX20 and C4000 have OneMesh Capability?
899 0
AX20 v1.2 Support for OneMesh
2458 1
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.