Home Network Community > All Threads > AX11000 and Air Print
< All Threads

AX11000 and Air Print

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

AX11000 and Air Print

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
AX11000 and Air Print
AX11000 and Air Print
2020-09-24 19:28:36 - last edited 2021-01-18 21:10:41
Model: Archer AX11000  
Hardware Version: V1
Firmware Version: 1.1.1 Build 20200716 rel.84595(5553)

Hi,

 

Did anyone else faced an issue getting the printer discovered on the home network?

Only been using AX11000 for a few days, and getting really frustrated. Can't discover Canon MF642C on the network at all.

Tried everything at this point:

- Wireless and Wired connection to the printer - Didn't help

- Tried fully resetting the printer and re-connecting it to the router again - Didn't help

- Tried different devices from Windows laptops to iPhones to connect to the printer - Didn't help

 

The only thing that worked is hard-coding a static IP address in the Win10 and Macbook setups to connect to the printer.

 

I used to have the Archer C5400, and the printer would always show up as an automatically discovered device on all my devices; now I can't use it outside of laptops.

 

Please help. Maybe some settings are messing with it?

 

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:AX11000 and Air Print-Solution
2021-01-15 14:35:55 - last edited 2021-01-18 21:10:41

@D3nt 

 

I know this is almost 4 months later, but in another thread someone stated:

I found turning off WMF fixed the issue. The WiFi adapters on these old devices probably can't handle it. I tried this and now my phones \ iPads and laptops can see Printers and TV for screen mirroring  

 

 

Recommended Solution
  2  
  2  
#7
Options
9 Reply
Re:AX11000 and Air Print
2020-09-25 15:26:17

@D3nt 

 

I would check the printer network configuration to make sure it is DHCP. That way the router will provide an IP to the print and place it on the DHCP list which you should then see on the DHCP client list.

  0  
  0  
#2
Options
Re:AX11000 and Air Print
2020-09-25 16:32:51

@Tony thanks.

Printer is on DHCP, as a matter fact, nothing about the printer changed. The only change in the home network was the new router CX5400 to AX11000.

I even reset the printer back to default, just to re-connect on factory settings and ensure nothing was sticky from the previous router connection - didn't help.

  0  
  0  
#3
Options
Re:AX11000 and Air Print
2020-09-25 21:42:00

@D3nt 

 

Here is a cannon support thread of people experiencing the same issues: 

 

https://community.usa.canon.com/t5/Wireless-Networking/Canon-imageCLASS-MF632Cdw-connected-to-network-but-not/td-p/256193/page/2

 

Looks like some did what you had mentioned in adding the fixed IP, others modified their firewall.

 

With respect to the TP-Link router, I would recommend reaching out to our support team.

  0  
  0  
#4
Options
Re:AX11000 and Air Print and Air Play
2020-09-28 00:54:52

@Tony Yeah, I just discovered a new problem - Air Play:

 

Same as with the printer. Older router - CX5400 used to work without a single issue. 

AX11000 - although my TV and my phone are connected on the same WiFi, they DO NOT see each other. Again, tried a few things here and there, but nothing works.

So every device seems to connect; but most of the home network features are simply not working...

 

Getting super frustrated with this router... might go the "return this junk" route next week. For this much money, the router needs to be smart enough that I don't have to deal with basic setup issues between basic devices. You can't possibly expect someone pay nearly $500 and then spend weeks on Forums figuring this nonsense out...

 

  0  
  0  
#5
Options
Re:AX11000 and Air Print
2021-01-08 17:07:12

Possible fix:

1) I changed my two Brother laser printer's IP addresses to a static IP address by providing their MAC address. Six hours after a reboot, got the "No Airprinters found" message.

2) Rebooted the AX11000. Immediately my iPad finds the two Airprinters.

 

Maybe there is a bug in the DHCP lease time?

See the photo to see how to do this.

  0  
  0  
#6
Options
Re:AX11000 and Air Print-Solution
2021-01-15 14:35:55 - last edited 2021-01-18 21:10:41

@D3nt 

 

I know this is almost 4 months later, but in another thread someone stated:

I found turning off WMF fixed the issue. The WiFi adapters on these old devices probably can't handle it. I tried this and now my phones \ iPads and laptops can see Printers and TV for screen mirroring  

 

 

Recommended Solution
  2  
  2  
#7
Options
Re:AX11000 and Air Print
2021-02-07 20:59:19

@GeoGeo 

 

Life changing!!! Had issues before and this seems to have done the trick (at least for now)!

 

Printers, wemo devices, airplay, all would encounter issues here and there. Hopefully this finally makes the top of the line router actually a top of the line router that "just works."

 

Next up we need firmware for one mesh update!

  0  
  0  
#8
Options
Re:AX11000 and Air Print
2021-04-07 01:52:09

@GeoGeo You're my hero now

  0  
  0  
#9
Options
Re:AX11000 and Air Print
2021-04-07 02:06:15

@Obermeister so it appears that this will be temporary, then support gave me the new beta FW below. I've had it for about a month now and it's smooth:

 

https://static.tp-link.com/beta/2021/202103/20210311/ax11000v1-up-ver1-1-1-P8[20201207-rel86202]_sign_2020-12-08_14.08.30.zip

  0  
  0  
#10
Options

Information

Helpful: 0

Views: 2244

Replies: 9

Related Articles
Archer AX10000 and AX11000
666 1
AX11000 IPV6
813 0
Archer AX11000 firmware
1406 0
AX11000 Firmware Update
1125 0
Archer AX11000 one mesh
1989 0
AX11000 en two RE605x
936 1
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.