Home Network Community > All Threads > TL-WR902AC Client settings
< All Threads

TL-WR902AC Client settings

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

TL-WR902AC Client settings

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TL-WR902AC Client settings
TL-WR902AC Client settings
2020-08-25 18:28:39
Model: TL-WR902AC  
Hardware Version: V3
Firmware Version: 191209

I am using the TL-WR902AC in Client mode to connect a TiVo Mini to a wireless network.  I have a few questions for those more knowldegable than me.

 

1. Is it possible to connect to BOTH 2.4 GHz and 5 GHz wireless bands simultaneously?

 

2. If I must choose one or the other, my 2.4 GHz network shows up with signal strenght of 98, while the 5 GHz shows up with 50. Which would be a better choice for video streaming?

 

 

 

 

  0      
 
  0      
 
#1
Options
2 Reply
Re:TL-WR902AC Client settings
2020-08-25 19:01:45

@Jeff-4 

 

Hi Jeff,

 

1.  No in client mode the 902AC is acting like a network adapter.  You can only connect to 1 band at a time.

 

2.  2.4Ghz has greater range but smaller through put.  It has a higher chance network buffering.  The 5 GHz has lower range but higher throughput so less buffering.  If you are watching HD i'd recommend if possible to use the 5GHz.

Check out the Latest: Recent Smart Home Features and Updates for Tapo and Kasa Securing Your TP-Link ID with 2FA:Deco and Tether | Smart Home Splash into a Smarter Summer with Sub-G Sensors, Matter, and Apple Home!
  0  
  0  
#2
Options
Re:TL-WR902AC Client settings
2020-08-25 19:14:51
Thanks! I'll try the 5 GHz connection. My fear is that it may not be as stable than the 2.4 GHZ, but I can easily switch back. By the way, to access the TL-WR902AC settings readily, I have set a static IP address and turned off its DHCP server. Otherwise I need to randomly search through various IPs assigned by the server on my router to find it. Strangely, the V3 TL-WR902AC is not compatible with TP-Link's Tether app.
  0  
  0  
#3
Options

Information

Helpful: 0

Views: 864

Replies: 2

Related Articles
TL-WR902AC Client mode fails
824 0
TL-WR902AC change the DHCP Client Name from "TL-WR902AC" To something less obvious like IphoneX
1223 0
TL-WR902AC Firmware
872 0
Updated TL-WR902AC
434 0
TL-WR902AC MAC cloning
820 0
Enable gigabit on TL-WR902AC?
1322 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.