Home Network Community > All Threads > Can the RE200 be configured as a wired Access Point
< All Threads

Can the RE200 be configured as a wired Access Point

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Can the RE200 be configured as a wired Access Point

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Can the RE200 be configured as a wired Access Point
Can the RE200 be configured as a wired Access Point
2020-07-06 21:36:17 - last edited 2020-07-06 21:37:57
Model: RE200  
Hardware Version: V3
Firmware Version: 3.8

A very long ethernet cable is attached to the router: the other end of the CAT5E is to be attached to an access point (RE200).   Traffic from the RE200 to the router must flow through the ethernet cable.   How can the RE200's ethernet port be configured for DHCP and the 2.4 and 5 GHz radios as Access Points?

  0      
 
  0      
 
#1
Options
2 Reply
Re:Can the RE200 be configured as a wired Access Point
2020-07-08 15:55:59

@gatorback 

 

Yes, you can configure the RE200 to act like an Access Point where it will pull the internet from the Ethernet cable and provide 2.4G and 5G wireless networks.

 

Here is an article that will show you how:

 

https://www.tp-link.com/us/support/faq/1401/

  2  
  2  
#2
Options
Re:Can the RE200 be configured as a wired Access Point
2020-10-17 05:29:17

@Tony This doesn't work.  I've tried it about a dozen times tonight.  It's not getting enough info to connect.

  5  
  5  
#3
Options

Information

Helpful: 0

Views: 10897

Replies: 2

Related Articles
Configure RE200 as a wireless adapter for wired device?
8369 0
RE200 Hardware V1.1 configure as an access point
631 1
Using RE200 as Access Point
1917 0
RE200 as Access Point, low speed on 2.4Ghz
759 0
tp-link RE200 error message
852 0
Invalid ip configuration on extender re200
2440 1
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.