AX3000 5G Connectivity Rate not Steady

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

AX3000 5G Connectivity Rate not Steady

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
AX3000 5G Connectivity Rate not Steady
AX3000 5G Connectivity Rate not Steady
2020-06-09 11:48:39
Model: Archer AX3000  
Hardware Version: V1
Firmware Version: 1.04

My 5G connectitivy rate will not stay steady.  It will drop from 500Mbs to 5 Mbs.  It will normally hold around 300Mbs but then under load will drop to 5Mbs for about 30 seconds.

  0      
  0      
#1
Options
1 Reply
Re:AX3000 5G Connectivity Rate not Steady
2020-06-09 21:11:40

@Thubbert 

 

I would start with making sure the firmware is up to date and also modifying the wireless channel and width. Factory defaulting the router would be good to try as well if it has not been done yet. The 5GHz is very susceptible to interference from objects like walls so if you are at a distance test in the same room to see if it clears up. If there are no issues in the same room then where you'd want the 5GHz may be too far, but if it still happens then there may be an issue with the 5GHz antenna. 

 

A last test you can also try is to only have one device connected to the router to see if the drop happens. There could be another device hogging the bandwidth while it does an update or sync with the cloud (Dropbox/OneDrive). 

  0  
  0  
#2
Options

Information

Helpful: 0

Views: 425

Replies: 1

Related Articles