Firmware for TL-WPA8630(P) TL-PA8033(P) TL-PA8030(P) TL-PA8010(P) QCA75XX-2.11.0.0043
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Powerline firmware for TL-WPA8730(P) TL-WPA8630(P) TL-PA8033(P) TL-PA8030(P) TL-PA8010(P) version QCA75XX-2.11.0.0043
This firmware is with 1200Mbit and 1300Mbit adapters compatible of every manufacturer with QCA7500 and QCA7550 chip regardless of hardware version.
Update via tpPLC_Utility for Windows or Mac with PIB file of previous firmware update.
TL-WPA8630(P):
QCA7500-2.11.0043_for_usual_hardware.nvm
https://mega.nz/file/pdVTmSyQ#iKH_4xY9GSZkxLl5HD5g_mxHt80AMREp0Oh4qBZFf7Q
QCA7500-2.11.0043_module_at_position_5_additional_so_with_7_modules_for_new_hardware.nvm Function of this module 5 unknown and not tested but was seen at devices with QCA7550 chip beginning August 2021). Works with TL-WPA8630 V1.
https://mega.nz/file/lAEBXCgS#dmHePU8qzffBicMYQd04hyb13xHrEIh1JdPZjaeTp5I
TL-PA8010(P), TL-PA8030(P), TL-PA8033(P): (hardware revisions with more memory could use as well the not stripped nvm file)
QCA7500-2.11.0043_modules_5-6_stripped_for_usual_hardware.nvm (description of modules 5 and 6 is written in message #113 of this thread)
https://mega.nz/file/UcUx1aYS#Dve_qReXile2jBg-OrBg5YGL5nQ4ppctxyH2atUTAwI
QCA7500-2.11.0043_module_at_position_5_additional_so_with_5_modules_for_new_hardware.nvm without the modules which are named 5 and 6 but here would be 6 and 7 for newer hardware with e.g. more memory. Function of this module 5 unknown and not tested.
https://mega.nz/file/YJkiCCrK#uykjC0_MYmqlA-rHaMuTc6iWEEPvTGsrKA109F-MuJk
Changes to version 2.10.0.0032 are:
Stability increase
IPTV streaming to several adapters improved
Previous:
QCA75XX-2.10.0.0032.nvm
https://mega.nz/file/5cEl2KLA#0rEqjZPwJJIvxkSlubBLGOHkgtqJ81Tlx4LxcXl41qE
QCA75XX-2.10.0.0032_modules_5-6_stripped.nvm
https://mega.nz/file/REcliYJC#iicAohSemkzZNzDljGRDVStwdX-fkzhaCBYO0ytQGnM
TL-WPA8630(P):
QCA75XX-2.8.0.0030.nvm
https://mega.nz/file/NENXSSpb#uNPKc30NMc9E9hM8YiC491exuoo4wFMoc-2_Byuv5fU
TL-PA8010(P), TL-PA8030(P), TL-PA8033(P):
QCA75XX-2.8.0.0030_modules_5-6_stripped.nvm
https://mega.nz/file/MJMngIgD#ZCDdBo5F1T_bIeGQM2tv8qpgz62lno-2oPAXY9K9o6g
Changes to version 2.8.0.0030 are:
Stability increase
Powerline network management improvement
Changes to version 2.7.0.0041 are:
Transfer speed increase
Boot time reduction
Stability increase
This is an official public available firmware.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@PowerlineFW I have a TP-Link TP-8630(P) v1 UK wireless , currently running firmware 2.7, I tried to update to 2.8 with the firmware link on mega.nz -
QCA75XX-2.8.0.0030.nvm selected the v2.8 NVM and the .pib from the 2.7 firmware but the TP-Link software immediately reports "Update Failed". which is the correct firmware and PIB file that should be used please?
the other plugs I have a TP-8010(P) and a TP-8030(P) all updated successfully to 2.8 but not the TP-8630(P).
thank you
- Copy Link
- Report Inappropriate Content
Andy_W wrote
@PowerlineFW I have a TP-Link TP-8630(P) v1 UK wireless , currently running firmware 2.7, I tried to update to 2.8 with the firmware link on mega.nz -
QCA75XX-2.8.0.0030.nvm selected the v2.8 NVM and the .pib from the 2.7 firmware but the TP-Link software immediately reports "Update Failed". which is the correct firmware and PIB file that should be used please?
the other plugs I have a TP-8010(P) and a TP-8030(P) all updated successfully to 2.8 but not the TP-8630(P).
thank you
The adapter with WIFI extender (TP-WPA-8630(P) v1 UK) can be upgraded with the regular or the stripped version (_stripped.nvm). Which one will be successful varies. When the normal version fails to install use/try the stripped version (or vice versa). A failed update will not brick your device.
Please, also check if your downloaded firmware files are not corrupted. Download the files again an use those to update your device. I had this issue when updating to 2.11.
You have an issue updating the WIFI adapter. When updating the TP-WPA-8630(P) v1 UK WIFI adapter also requires a .pib and .nvm file but the TP Link Utility only asks for a .bin file (.bin is for WIFI updates). There's only a relative short window of time to get to the proper update fields (.pib and .nvm). Best shown here:
https://www.youtube.com/watch?v=GmrQZI6b9L8&t=1171s
- Copy Link
- Report Inappropriate Content
@Andy_W You must use the "stripped" version:
2.8.0.0030_modules_5-6_stripped.nvm
And detailed in the video I had shared in my last post.
https://www.youtube.com/watch?v=GmrQZI6b9L8&t=1121s
Have a nice day
- Copy Link
- Report Inappropriate Content
@TheDarkgg thank you, I will give that a try. what does it mean when it's a "strippped" version ?
- Copy Link
- Report Inappropriate Content
@Andy_W Some TPLink PLC models have a smaller memory cache than other models. This memory cache is used during a firmware update.
The stripped version allows to work on a smaller cache.
If I don't say stupid things. :)
- Copy Link
- Report Inappropriate Content
Firmware TL-WPA8730(P) TL-WPA8630(P) TL-PA8033(P) TL-PA8030(P) TL-PA8010(P) QCA75XX-2.12.0.0061
newer powerline firmware https://community.tp-link.com/us/home/forum/topic/553172?page=1
I couldn`t update the old thread with new links to mega dueto it is now detected as an illegal link
- Copy Link
- Report Inappropriate Content
Information
Helpful: 7
Views: 39237
Replies: 116
Voters 7
