Deco M9 setup Unable to connect to the internet
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.Deco M9 setup Unable to connect to the internet
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
This is my first setup on DECO M9 for my house TM unifi network:
So i have removed my old Dlink DIR 850L with the new deco m9 plus router and below is the current setup:
Huawei HG8240w (MODEM) -> Deco M9 plus (main router)
After setting up the wifi name, seems like my Deco won't connect to the internet and error "Unable to connect to the internet" prompted.
I can confirmed that my internet is working good as i have tested by replugged in the old router and was able to access the internet. Appreciate your urgent help on the troubleshooting please.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Leave the Deco powered on and connected to the modem. Power down just the modem, and leave it off for several minutes, and then power it up. Once the modem fully boots up, beging the Deco setup.
If that still is not working, put your D-Link device back, verify it has intenret, and then look at the WAN settings of the D-Link. Is the WAN set for DHCP or another setting for the connection type?
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
The modem may not be recognizing the Deco. Leave the Deco powered on, and only reboot the modem.
- Copy Link
- Report Inappropriate Content
@Georgea89 I am also having the same issue... anyone get it fixed?
- Copy Link
- Report Inappropriate Content
I'm having the exact issue. I can create a wifi but then it's unable to connect to the internet. Using a Arris Surfboard SB8200. It's driving me crazy tat I can't figure this out....
I tried to leave the deco powered on and reset the modem but that didn't work...
- Copy Link
- Report Inappropriate Content
@sofasonics I am also using sb8200 let's keep eachother updated if we figure anything out.
- Copy Link
- Report Inappropriate Content
@sofasonics ok so this sounds dumb... I tried using different decos but never tried switching the power supply cord. After switching the power supply cord, it worked perfectly. Now just have to get a new cord so we will see how big of a hassle that is.
- Copy Link
- Report Inappropriate Content
@Nickbl Glad it's working for you!! I got mine figure out too. I released and renewed the IP and the second I hit enter, the light turned green and it worked!
- Copy Link
- Report Inappropriate Content
Same thing happened here. Had to delete and set my network back up from scratch. My old $30 Netgear router ran for literal years on end with no issue and of course as soon as I blow hundreds of dollars on this system, it can't make it two weeks without wiping out. Starting to understand why Deco has gotten has such a consistently lukewarm response everywhere online.
- Copy Link
- Report Inappropriate Content
@Mynameisclark the message show unable to connect to Internet.
Contact your ISP to make sure the internet service is working normally.
I have called my ISP unifi they say internet is working
I tried to use back the old router but unifi has reset my password so what can I do?
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 8439
Replies: 17
Voters 0
No one has voted for it yet.