No range extender mode

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

No range extender mode

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
No range extender mode
No range extender mode
2020-03-25 10:45:55
Model: TD-W8980  
Hardware Version: V1
Firmware Version: 130828 ref38099n

Hi, Cannot access range extender mode on above router again. Did access it once after playing around with settings and connected to TL-WR940L router /modem set  router up and it worked, to make sure changed SSID and used it for about 30 mins and worked as it should, but when I disconnected to change its position for a better signal around house would not connect again. Have tried everthing I know in last few days but still cant access range extender mode , Followed quick set up guide supplied with W8970 in beguining but no Range extender mode was in menu. Have tried erasing VPI 8 /VCI 35 (Using Movistar Spain with WD8970).  Many Thanks in advance. 

  0      
  0      
#1
Options
1 Reply
Re:No range extender mode
2020-03-26 17:07:58

@sarum 

 

The TL-W8980 does not have a specific mode you can choose. What it does have is WDS which the W8980 will connect to the configured band and extend that out. You can only extend one band, not both the 2.4GHz and 5GHz.

 

Here is the FAQ that will show you how to do it: https://www.tp-link.com/us/support/faq/447/

  0  
  0  
#2
Options

Information

Helpful: 0

Views: 606

Replies: 1

Related Articles