TP-Link WR940N dashboard access
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
I'm unable to access router (TP-Link WR940N) dashboard to change the default password and name.
How can I do it ?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Follow the steps to login the router’s web interface :
1 – Make sure you are connected to the router’s network .
2 – Open your web browser and visit gateway IP : 192.168.0.1.
3 – A window prompts for a Username and Password.
4 – Enter the router’s Username : admin and the Password admin.
5 – You will now be logged in, now you can make changes according to your requirements.
TP-Link Router Login Details
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Go to the any browser and type http://192.168.1.1 or http://192.168.0.1 or http://tplinklogin.net and then enter your LAN IP of your router model.
after this enter your admin and password. after entering both of column, you can see at left side security>remote managment, Click on this link. now the remote managment is disable, now you can change easily the remote managment ip address form 255.255.255.255. if you can't able to resolve the issue then click on this link to get more information to reolve your issue.
- Copy Link
- Report Inappropriate Content
Follow the steps to login the router’s web interface :
1 – Make sure you are connected to the router’s network .
2 – Open your web browser and visit gateway IP : 192.168.0.1.
3 – A window prompts for a Username and Password.
4 – Enter the router’s Username : admin and the Password admin.
5 – You will now be logged in, now you can make changes according to your requirements.
TP-Link Router Login Details
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 1320
Replies: 4
Voters 0
No one has voted for it yet.