Port Fowarding on Archer C9 v5.0
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Can someone please assist with port forwarding on the Archer C9? I'm trying to establish api-key downloads but have not been able to figure out how to establish port forwarding on this router.
Thanks in advance for the assistance on this n00b question.
@airmaxin180 On the C9, you go to: Advanced --> NAT Forwarding --> Virtual Servers --> Add -->
- Service Type: type something you'll remember it by
- External port: the TCP and/or UDP port or port range on your router
- Internal IP: the IP address of the desired device on your LAN (be sure to make it a static IP because if the IP address changes, the port forwarding will stop working)
- Internal port: the TCP and/or UDP port or port range on the desired device on your LAN
- Protocol: TCP, UDP or both ("All"). If you don't know which to use, then select "All".
