Home Network Community > All Threads > Virtual Server Port forwarding issue on AC5400X
< All Threads

Virtual Server Port forwarding issue on AC5400X

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Virtual Server Port forwarding issue on AC5400X

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Virtual Server Port forwarding issue on AC5400X
Virtual Server Port forwarding issue on AC5400X
2019-07-22 13:28:06
Model: Archer C5400X  
Hardware Version: V7
Firmware Version: newest

Recently switched from an older Netgear to the AC5400X. Enabled port forwarding via virtual server for my Security Camera's. All settings seem to be correct and it will work for about 30 seconds or so, then I am unable to connect. Using latest firmware, tried factory restore, UPNP is enabled, using IP address reservation, WAN ip is correct, servers are entered correctly, port#'s are correct, rebooted all devices, etc. Are there any other settings that need to be changed or is there something I am missing? Everything else functions properly. When I switch back to my old router, everything works fine again. Thanks.

  0      
 
  0      
 
#1
Options
6 Reply
Re:Virtual Server Port forwarding issue on AC5400X
2019-07-22 17:54:51

@intr 


If you enable DMZ for one of the cameras do you get the same symptom?

 

Another thing to try is to change the port used on the security camera to a completley different one, and update the virtual servers to the new port.

  0  
  0  
#2
Options
Re:Re:Virtual Server Port forwarding issue on AC5400X
2019-07-22 18:04:36
Thank you for the response. I enabled the DMZ for one of the camera's and also tried changing the port via DVR and virtual server, yet same issue. Either doesn't work at all, or works for a minute or so after rebooting router.
  0  
  0  
#3
Options
Re:Virtual Server Port forwarding issue on AC5400X
2019-07-23 15:42:58

@intr 

 

Try to update the firmware with the latest release, even if it already is updated, apply the firmware again to see if it is software related.

  0  
  0  
#4
Options
Re:Virtual Server Port forwarding issue on AC5400X
2020-05-02 22:31:23

Hello @intr! Were you able to solve this issue? I am experiencing the same problem and behaviour. Already tried a few things...

  0  
  0  
#5
Options
Re:Virtual Server Port forwarding issue on AC5400X
2020-05-02 23:03:51
It started working for me. Who knows... Checklist: - Firewalls - Virtual Server - Ports, IPs - Test from LAN, WAN, Internet device.
  0  
  0  
#6
Options
Re:Virtual Server Port forwarding issue on AC5400X
2020-05-02 23:40:25 - last edited 2020-05-02 23:41:18

@alecor, I tried everything I could think of including all the suggestions here and I was never able to resolve the issue. Unfortunately I had to return the router a few weeks later. I ended up with an *sus wifi 6 and haven't had any trouble with it. Good luck, glad you got it working!

  0  
  0  
#7
Options

Information

Helpful: 0

Views: 2240

Replies: 6

Related Articles
issue with the Archer AC5400x WAN port
1080 0
C5400X Port Forwarding not working
901 0
Archer A8 has no "virtual server" for forwarding ports.
1919 0
About the Virtual Server
510 0
Archer a6 server port forwarding
8308 0
No Virtual Server Option on AXE300/16000
632 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.