Archer C9 randomly rebooting

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Archer C9 randomly rebooting

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Archer C9 randomly rebooting
Archer C9 randomly rebooting
2018-03-27 13:59:10
Model :

Hardware Version :

Firmware Version :

ISP :

once a day or so my router randomly reboots. it's making me nuts. I've seen solutions for other models but couldn't find one for the archer c9. Anyone?


ArcherC9 v3.0
1.3.0 Build 20161018 rel.71163(5553)


and the logs are weird too - always a few with the right date, and then they are a couple of years old. didn't even have the router back then....

Hardware Version: ArcherC9 v3.0
Software Version: 1.3.0 Build 20161018 rel.71163


2018-03-26 21:47:01 led-controller[923]: <6> 288051 Start to run WAN1_ON
2018-03-26 21:47:01 led-controller[923]: <7> 288004 WAN1_ON is found
2018-03-26 21:47:01 led-controller[923]: <7> 288003 Led rule name is WAN1_ON
2018-03-26 21:47:01 led-controller[923]: <7> 288001 Receive data length = 132
2018-03-26 21:47:01 led-controller[923]: <6> 288051 Start to run WAN0_OFF
2018-03-26 21:47:01 led-controller[923]: <7> 288004 WAN0_OFF is found
2018-03-26 21:47:01 led-controller[923]: <7> 288003 Led rule name is WAN0_OFF
2018-03-26 21:47:01 led-controller[923]: <7> 288001 Receive data length = 132
2018-03-26 21:47:01 led-controller[923]: <6> 288051 Start to run LAN_ON
2018-03-26 21:47:01 led-controller[923]: <7> 288004 LAN_ON is found
2018-03-26 21:47:01 led-controller[923]: <7> 288003 Led rule name is LAN_ON
2018-03-26 21:47:01 led-controller[923]: <7> 288001 Receive data length = 132
2018-03-26 21:46:28 locale[9350]: <6> 283051 Language is changed to 'en_US'
2018-03-26 21:46:28 locale[9350]: <7> 283002 Explorer language is 'en_US'
2018-03-26 21:46:21 qos[9126]: <6> 259504 Service start
2018-03-26 21:46:21 qos[9126]: <6> 259503 Function disabled
2018-03-26 21:46:21 qos[9126]: <6> 259505 Service stop
2018-03-26 21:46:20 upnp[9020]: <6> 217504 Service start
2018-03-26 21:46:19 upnp[9020]: <6> 217505 Service stop
2016-10-18 00:00:43 nat[7338]: <6> 211021 IPSEC ALG enabled
2016-10-18 00:00:43 nat[7338]: <6> 211021 L2TP ALG enabled
2016-10-18 00:00:43 nat[7338]: <6> 211021 PPTP ALG enabled
2016-10-18 00:00:43 nat[7338]: <6> 211021 SIP ALG enabled
2016-10-18 00:00:43 nat[7338]: <6> 211021 RTSP ALG enabled
2016-10-18 00:00:43 nat[7338]: <6> 211021 H323 ALG enabled
2016-10-18 00:00:43 nat[7338]: <6> 211022 TFTP ALG disabled
2016-10-18 00:00:43 nat[7338]: <6> 211022 FTP ALG disabled
2016-10-18 00:00:43 led-controller[923]: <6> 288051 Start to run WAN1_ON
2016-10-18 00:00:43 led-controller[923]: <7> 288004 WAN1_ON is found
2016-10-18 00:00:43 led-controller[923]: <7> 288003 Led rule name is WAN1_ON
2016-10-18 00:00:43 led-controller[923]: <7> 288001 Receive data length = 132
2016-10-18 00:00:43 led-controller[923]: <6> 288051 Start to run WAN0_OFF
2016-10-18 00:00:43 led-controller[923]: <7> 288004 WAN0_OFF is found
2016-10-18 00:00:43 led-controller[923]: <7> 288003 Led rule name is WAN0_OFF
2016-10-18 00:00:43 led-controller[923]: <7> 288001 Receive data length = 132
2016-10-18 00:00:42 led-controller[923]: <6> 288051 Start to run LAN_ON
2016-10-18 00:00:42 led-controller[923]: <7> 288004 LAN_ON is found
2016-10-18 00:00:42 led-controller[923]: <7> 288003 Led rule name is LAN_ON
2016-10-18 00:00:42 led-controller[923]: <7> 288001 Receive data length = 132
2016-10-18 00:00:42 nat[7338]: <5> 211054 Virtual server created succeeded[ex-port:80 ip:192.168.0.114 in-port:80 protocol:tcp]
2016-10-18 00:00:39 locale[7843]: <6> 283051 Language is changed to 'en_US'
2016-10-18 00:00:39 locale[7843]: <7> 283002 Explorer language is 'en_US'
2016-10-18 00:00:38 nat[7338]: <6> 211501 Initialization succeeded
2016-10-18 00:00:37 nat[7338]: <6> 211501 Initialization succeeded
2016-10-18 00:00:37 locale[7396]: <6> 283051 Language is changed to 'en_US'
2016-10-18 00:00:37 locale[7396]: <7> 283002 Explorer language is 'en_US'
2016-10-18 00:00:31 led-controller[923]: <6> 288051 Start to run WAN1_OFF
2016-10-18 00:00:31 led-controller[923]: <7> 288004 WAN1_OFF is found
2016-10-18 00:00:31 led-controller[923]: <7> 288003 Led rule name is WAN1_OFF
2016-10-18 00:00:31 led-controller[923]: <7> 288001 Receive data length = 132
2016-10-18 00:00:31 led-controller[923]: <6> 288051 Start to run WAN0_ON
2016-10-18 00:00:31 led-controller[923]: <7> 288004 WAN0_ON is found
2016-10-18 00:00:31 led-controller[923]: <7> 288003 Led rule name is WAN0_ON
2016-10-18 00:00:31 led-controller[923]: <7> 288001 Receive data length = 132
2016-10-18 00:00:31 led-controller[923]: <6> 288051 Start to run LAN_ON
2016-10-18 00:00:31 led-controller[923]: <7> 288004 LAN_ON is found
2016-10-18 00:00:31 led-controller[923]: <7> 288003 Led rule name is LAN_ON
2016-10-18 00:00:31 led-controller[923]: <7> 288001 Receive data length = 132
2016-10-18 00:00:28 led-controller[923]: <6> 288051 Start to run STATUS_ON
2016-10-18 00:00:28 led-controller[923]: <7> 288004 STATUS_ON is found
2016-10-18 00:00:28 led-controller[923]: <7> 288003 Led rule name is STATUS_ON
2016-10-18 00:00:28 led-controller[923]: <7> 288001 Receive data length = 132
2016-10-18 00:00:27 qos[7054]: <6> 259504 Service start
2016-10-18 00:00:27 qos[7054]: <6> 259503 Function disabled
2016-10-18 00:00:21 factory-reset[5782]: <6> 284504 Service start
2016-10-18 00:00:21 parental-control[5686]: <6> 229504 Service start
2016-10-18 00:00:20 parental-control[5686]: <6> 229503 Function disabled
2016-10-18 00:00:20 access-control[5589]: <6> 239504 Service start
2016-10-18 00:00:20 access-control[5589]: <6> 239503 Function disabled
2016-10-18 00:00:20 led-controller[923]: <6> 288051 Start to run USB1
2016-10-18 00:00:20 led-controller[923]: <7> 288004 USB1 is found
2016-10-18 00:00:20 led-controller[923]: <7> 288003 Led rule name is USB1
2016-10-18 00:00:20 led-controller[923]: <7> 288001 Receive data length = 132
2016-10-18 00:00:18 nat[4812]: <7> 211001 Flush conntrack
2016-10-18 00:00:18 nat[4812]: <6> 211502 Function enabled
2016-10-18 00:00:18 nat[4812]: <5> 211051 Create NAT chain succeeded
2016-10-18 00:00:17 nat[4812]: <6> 211501 Initialization succeeded
2016-10-18 00:00:16 nat[4812]: <6> 211501 Initialization succeeded
2016-10-18 00:00:15 basic-security[4236]: <6> 219504 Service start
2016-10-18 00:00:15 basic-security[4236]: <5> 219606 Flush conntrack table succeeded
2016-10-18 00:00:14 firewall[2053]: <6> 209504 Service start
2016-10-18 00:00:09 imb[3101]: <6> 218507 Daemon connection succeeded
2016-10-18 00:00:09 imb[3101]: <6> 218012 ARP Binding disabled
2016-10-18 00:00:09 imb[3101]: <6> 218506 Config interface initialization succeeded
2016-10-18 00:00:09 imb[3101]: <6> 218501 Initialization succeeded
2016-10-18 00:00:08 upnp[2856]: <6> 217504 Service start
2016-10-18 00:00:08 upnp[2856]: <6> 217505 Service stop
2016-10-18 00:00:00 led-controller[923]: <6> 288051 Start to run USB1
2016-10-18 00:00:00 led-controller[923]: <7> 288004 USB1 is found
2016-10-18 00:00:00 led-controller[923]: <7> 288003 Led rule name is USB1
2016-10-18 00:00:00 led-controller[923]: <7> 288001 Receive data length = 132
2016-10-18 00:00:00 led-controller[923]: <6> 288051 Start to run STATUS_SAN
2016-10-18 00:00:00 led-controller[923]: <7> 288004 STATUS_SAN is found
2016-10-18 00:00:00 led-controller[923]: <7> 288003 Led rule name is STATUS_SAN
2016-10-18 00:00:00 led-controller[923]: <7> 288001 Receive data length = 132
2016-10-18 00:00:00 led-controller[923]: <6> 288051 Start to run USB1_twinkle
2016-10-18 00:00:00 led-controller[923]: <7> 288004 USB1_twinkle is found
2016-10-18 00:00:00 led-controller[923]: <7> 288003 Led rule name is USB1_twinkle
2016-10-18 00:00:00 led-controller[923]: <7> 288001 Receive data length = 132
1970-01-01 00:00:12 led-controller[923]: <6> 288504 Service start
1970-01-01 00:00:12 led-controller[923]: <7> 288002 Adding led WLAN5G
1970-01-01 00:00:12 led-controller[923]: <7> 288002 Adding led WLAN2G
1970-01-01 00:00:12 led-controller[923]: <7> 288002 Adding led STATUS
1970-01-01 00:00:12 led-controller[923]: <7> 288002 Adding led WAN2
1970-01-01 00:00:12 led-controller[923]: <7> 288002 Adding led WAN1
1970-01-01 00:00:12 led-controller[923]: <7> 288002 Adding led WPS
1970-01-01 00:00:12 led-controller[923]: <7> 288002 Adding led USB3
1970-01-01 00:00:12 led-controller[923]: <7> 288002 Adding led USB1
1970-01-01 00:00:12 led-controller[923]: <7> 288002 Adding led LAN
  0      
  0      
#1
Options
2 Reply
Re:Archer C9 randomly rebooting
2018-03-27 15:50:16
so wired. i think you should contact tp-link email support so they can analyze this log.
  0  
  0  
#2
Options
Re:Archer C9 randomly rebooting
2019-12-24 03:40:35

@Ada  same happening to mine:

 

Hardware Version: ArcherC9 v5.0
Software Version: 1.2.4 Build 20190403 rel.63869

2019-12-23 19:32:55 locale[14161]: <6> 283051 Language is changed to 'en_US'
2019-12-23 19:32:55 locale[14161]: <7> 283002 Explorer language is 'en_US'
2019-12-23 19:32:49 locale[13999]: <6> 283051 Language is changed to 'en_US'
2019-12-23 19:32:49 locale[13999]: <7> 283002 Explorer language is 'en_US'
2019-12-23 19:32:48 locale[13954]: <6> 283051 Language is changed to 'en_US'
2019-12-23 19:32:48 locale[13954]: <7> 283002 Explorer language is 'en_US'
2019-12-23 19:23:42 led-controller[938]: <3> 288753 Config importing failed
2019-12-23 19:23:42 led-controller[938]: <7> 288009 Failed to read WAN_ON
2019-12-23 19:23:42 led-controller[938]: <7> 288003 Led rule name is WAN_ON
2019-12-23 19:23:42 led-controller[938]: <7> 288001 Receive data length = 132
2019-12-23 19:23:42 led-controller[938]: <6> 288051 Start to run WAN1_ON
2019-12-23 19:23:42 led-controller[938]: <7> 288004 WAN1_ON is found
2019-12-23 19:23:42 led-controller[938]: <7> 288003 Led rule name is WAN1_ON
2019-12-23 19:23:42 led-controller[938]: <7> 288001 Receive data length = 132
2019-12-23 19:23:42 led-controller[938]: <6> 288051 Start to run WAN0_OFF
2019-12-23 19:23:42 led-controller[938]: <7> 288004 WAN0_OFF is found
2019-12-23 19:23:42 led-controller[938]: <7> 288003 Led rule name is WAN0_OFF
2019-12-23 19:23:42 led-controller[938]: <7> 288001 Receive data length = 132
2019-12-23 19:23:42 led-controller[938]: <6> 288051 Start to run LAN_ON
2019-12-23 19:23:42 led-controller[938]: <7> 288004 LAN_ON is found
2019-12-23 19:23:42 led-controller[938]: <7> 288003 Led rule name is LAN_ON
2019-12-23 19:23:42 led-controller[938]: <7> 288001 Receive data length = 132
2019-04-03 00:00:52 qos[9085]: <6> 259504 Service start
2019-04-03 00:00:52 qos[9085]: <6> 259503 Function disabled
2019-04-03 00:00:52 qos[9085]: <6> 259505 Service stop
2019-04-03 00:00:51 upnp[9023]: <6> 217504 Service start
2019-04-03 00:00:51 upnp[9023]: <6> 217505 Service stop
2019-04-03 00:00:46 locale[8755]: <6> 283051 Language is changed to 'en_US'
2019-04-03 00:00:46 locale[8755]: <7> 283002 Explorer language is 'en_US'
2019-04-03 00:00:46 led-controller[938]: <6> 288051 Start to run WIFI5G_ON
2019-04-03 00:00:46 led-controller[938]: <7> 288004 WIFI5G_ON is found
2019-04-03 00:00:46 led-controller[938]: <7> 288003 Led rule name is WIFI5G_ON
2019-04-03 00:00:46 led-controller[938]: <7> 288001 Receive data length = 132
2019-04-03 00:00:46 nat[7941]: <6> 211021 IPSEC ALG enabled
2019-04-03 00:00:46 nat[7941]: <6> 211021 L2TP ALG enabled
2019-04-03 00:00:46 led-controller[938]: <6> 288051 Start to run WIFI2G_ON
2019-04-03 00:00:46 led-controller[938]: <7> 288004 WIFI2G_ON is found
2019-04-03 00:00:46 led-controller[938]: <7> 288003 Led rule name is WIFI2G_ON
2019-04-03 00:00:46 led-controller[938]: <7> 288001 Receive data length = 132
2019-04-03 00:00:46 nat[7941]: <6> 211021 PPTP ALG enabled
2019-04-03 00:00:46 nat[7941]: <6> 211021 SIP ALG enabled
2019-04-03 00:00:45 nat[7941]: <6> 211021 RTSP ALG enabled
2019-04-03 00:00:45 nat[7941]: <6> 211021 H323 ALG enabled
2019-04-03 00:00:45 nat[7941]: <6> 211021 TFTP ALG enabled
2019-04-03 00:00:45 nat[7941]: <6> 211021 FTP ALG enabled
2019-04-03 00:00:42 led-controller[938]: <3> 288753 Config importing failed
2019-04-03 00:00:42 led-controller[938]: <7> 288009 Failed to read WAN_ON
2019-04-03 00:00:42 led-controller[938]: <7> 288003 Led rule name is WAN_ON
2019-04-03 00:00:42 led-controller[938]: <7> 288001 Receive data length = 132
2019-04-03 00:00:42 led-controller[938]: <6> 288051 Start to run WAN1_ON
2019-04-03 00:00:42 led-controller[938]: <7> 288004 WAN1_ON is found

  0  
  0  
#3
Options

Information

Helpful: 0

Views: 1996

Replies: 2

Related Articles