LED Light Meanings
For the Deco M5, Deco P7 and Deco M9 Plus, please refer to the following table to check your LED status.
|
Color Description |
Meaning of the LED status |
|
Yellow |
The Deco unit is starting up |
|
Blue pulse |
Deco is ready for setup |
|
Blue solid |
Deco is setting up |
|
Green solid |
Deco is registered and all is well |
|
Red |
Deco has an issue |
For the Deco M4, Deco E4 and Deco W2400, please refer to the following table to check your LED status.
|
Color Description |
Meaning of the LED status |
|
Yellow pulse |
Deco is resetting |
|
Yellow solid |
Deco is starting up |
|
Blue pulse |
Deco is ready for setup |
|
Blue solid |
Deco is setting up |
|
White pulse |
Deco is upgrading firmware |
|
White solid |
Deco is registered and all is well |
|
Red pulse |
Deco is disconnected from main Deco |
|
Red solid |
Deco has an issue |
For the Deco M3W, please refer to the following table to check the LED status.
|
LED |
Status |
Meaning of the LED status |
|
Power |
On/Off |
Deco Extender is on or off |
|
Pulse |
Deco Extender is starting up, upgrading firmware, or resetting |
|
|
Signal |
White Solid |
Internet service is available |
|
Red Solid |
Deco Extender is connected to main Deco but internet service is not available |
|
|
White Pulse |
WPS connection is in progress |
|
|
Red Pulse |
Deco Extender is disconnected from main Deco |
|
|
2.4GHz |
On/Off |
Deco Extender is connected or not connected to main Deco’s 2.4GHz Wi-Fi. |
|
5GHz |
On/Off |
Deco Extender is connected or not connected to main Deco’s 5GHz Wi-Fi |
Note: If there is a new model of the Deco, it’s suggested to check the meaning of LED status on the UG on the official website.
What makes the M4R LEDs stay yellow,stay starting up and not turn flashing Blue in order to be able to start setup?
All my lights are yellow including internet
I have a Deco 4R (EU ) V1 stuck in a red light.
It is not accessible in any way and it does not respond to reset (hardware button).
If I hold the reset button while powering up, it starts blinking alternative yellow and blue which is not described in any manual, and it is not visible on ethernet or phone app.
What can I do ?
Try to reset the point via reset (keep it for no more than 1 second)
If the situation does not change, then try to restore the software.
1) download the firmware from the website
2) connect the PC with a cable, register the static ip on the PC 192.168.0.66 with a mask 255.255.255.0
3) unplug power
4) hold down the reset and, without releasing the reset, insert power
5) go to 192.168.0.1
6) upload the firmware
I have installed wireless cameras thruout my trilevel home. and I have 6 - M4R thruout my home - they are all with solid white LED - my issue is with these wireless cameras only getting 1and sometimes 2 bars of reseption, and these cameras are no more then 15 feet from the M4 units. what can I do tho make them not fall off their wireless conection ???
I have tryed 3 different types of wireless including Bing with all getting the same fall off issue
Hello community,
Currently, I am using a TP-Link Deco AC1200, and my Wi-Fi keeps turning off by itself, and then it starts working again after a while. When I checked my Deco, I noticed that there was a red light on, and it wasn't blinking. My Deco is connected to the internet and power. Can someone help me solve this issue?
XE75 Pro satellite has flashing blue light and won't set up.