Home Network Community > Wi-Fi Routers > Connect via "wired" AX10/AX1500 to BE550 PRO to extend coverage to detached garage
< Wi-Fi Routers

Connect via "wired" AX10/AX1500 to BE550 PRO to extend coverage to detached garage

Connect via "wired" AX10/AX1500 to BE550 PRO to extend coverage to detached garage

Connect via "wired" AX10/AX1500 to BE550 PRO to extend coverage to detached garage
Connect via "wired" AX10/AX1500 to BE550 PRO to extend coverage to detached garage
a week ago
Model: Archer BE550  
Hardware Version:
Firmware Version:

I am attempting to change the AX10 to AP mode but cannot access the AX10 menu using the Tether app.  I have ordered an Ethernet cable to attach to my laptop to gain access to the AX10 menu.   It would seem,  I should be able to access the AX10 via the wired connection from the LAN of the BE550 to the WAN of the AX10.  Is there a wireless approach to changing to the AP MODE of the AX10?

  0      
 
  0      
 
#1
Options
2 Reply
Re:Connect via "wired" AX10/AX1500 to BE550 PRO to extend coverage to detached garage
a week ago - last edited a week ago

  @KevinMellott 

 

Here's the guide for configuring AX10 in AP mode.

The AX10 LAN IP address (set a static IP address for easier access) shoiuld be within the BE550 LAN subnet.

When you connect the LAN cable between BE550 and AX10, use your laptop to access AX10 WebGUI by the its static IP address.

 

If this was helpful click on the arrow pointing upward to make it blue. If this solves your issue, click the star to make it blue and mark the post as a "Recommended Solution".
  0  
  0  
#2
Options
Re:Connect via "wired" AX10/AX1500 to BE550 PRO to extend coverage to detached garage
a week ago

  @KevinMellott Thank you so much.  That worked.  I was concerned that the Ethernet cable being 100 feet between the BE550 and the AX10  was going to be an issue.  We are up and running.

  0  
  0  
#3
Options

Information

Helpful: 0

Views: 66

Replies: 2

About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.