Home Network Community > Wi-Fi Routers > Settings Help
< Wi-Fi Routers

Settings Help

Settings Help

Settings Help
Settings Help
2 weeks ago - last edited a week ago
Model: Archer AX73  
Hardware Version: V2
Firmware Version: 1.1.2 Build 20250210 rel.53421(5553)

I am having the darndest time figuring out the right settings for Max Wi-Fi.

I have 1Gbps service, and for a minute I was getting 900Mbps Wi-Fi after installing.  I changed nothing at all and now I am only getting 500s Mbps.

My devices are all 1 gig capable so ????   Right Settings to return to the 900+ Mbps?

Also, I have a hardwired connection (ethernet) into my PC desktop.  Also 1Gbps capable.  I can't get more than 500s Mbps with a hardwired connection (Cat8 Shielded 25 foot cable) 

I have checked my cable's continuity and it is fine, so it is not the cable.

Any advice?  Suggestions?  Help?

Thank you in advance.

PPS - This is brand new out of the box, bought yesterday (April 3rd, 2025)

 

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:Settings Help-Solution
a week ago - last edited a week ago

  @Dwiggles 

 

Then most probably the QoS settings in your case are under HomeShield menu.

If this was helpful click on the arrow pointing upward to make it blue. If this solves your issue, click the star to make it blue and mark the post as a "Recommended Solution".
Recommended Solution
  2  
  2  
#8
Options
8 Reply
Re:Settings Help
a week ago

  @Dwiggles 

 

Hey there, welcome to the community!

 

That's definitely odd for a wired, gigabit-capable device. And it looks like your firmware is fully up to date.

 

Have you checked to see whether QoS has been enabled? You can find it under Advanced → QoS in the router's web UI. If so, disable it and see if things improve.

 

 

Check out the Latest: Getting Started with EasyMesh and TP-Link New Tablet Mode for the Tapo App Comparing the Latest Tapo Doorbells
  0  
  0  
#2
Options
Re:Settings Help
a week ago

  @Ryan 

Thank you for your response.

So checking for QoS in both the Router URL and Teather, I do not see QoS anywhere under advanced settings.

I did a search for QoS on the Router UI and the only thing that came up was the Router Log.

Is it possible this is hiding somewhere else?

  0  
  0  
#3
Options
Re:Settings Help
a week ago - last edited a week ago

  @Dwiggles 

 

in the UI it should be in the advance settings

  0  
  0  
#4
Options
Re:Settings Help
a week ago

  @ArcherC8 
It is no where in the ADvanced settings under any of the tabs on the left.  

I have checked each one on Both Teather and the Web based URL UI.

?????????????????????

  0  
  0  
#5
Options
Re:Settings Help
a week ago

  @Dwiggles 

 

Try another browser for accessing the router WenGUI QoS menu:

 

3f7a326ad84a44da922bf51d8635e4c3

 

Regarding your original issue, you may also check the negotiated speeds on your AX73 ethernet ports.

 

If this was helpful click on the arrow pointing upward to make it blue. If this solves your issue, click the star to make it blue and mark the post as a "Recommended Solution".
  2  
  2  
#6
Options
Re:Settings Help
a week ago

  @terziyski 

Thank you - The screenshots help a lot.  But that is not what I see under advanced in any of th 3 browsers I use (Edge, Firefox, Chrome)

Here is what I see

c9f18b5dbc204c08807cb7641361d769

  0  
  0  
#7
Options
Re:Settings Help-Solution
a week ago - last edited a week ago

  @Dwiggles 

 

Then most probably the QoS settings in your case are under HomeShield menu.

If this was helpful click on the arrow pointing upward to make it blue. If this solves your issue, click the star to make it blue and mark the post as a "Recommended Solution".
Recommended Solution
  2  
  2  
#8
Options
Re:Settings Help
a week ago

  @terziyski 

That was it - It was in Teather under More>

I have turned it off.  

Thank you

  0  
  0  
#9
Options

Information

Helpful: 0

Views: 168

Replies: 8

About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.