New BGW320 and Single Deco X55
Good Evening All,
I read through a lot of posts on DHCP and subnets, but it started going over my head so I was hoping for some help...
I recently replaced my BGW210/Airties 4921 with a BGW320 and single Deco X55
X55 is connected via ethernet wired backhaul
Both the BGW and X55 are both in router mode..(I don't game so I was looking for a quick and dirty setup.......)
Everything is on wireless EXCEPT my main PC which is hooked to a BGW lan port
All devices were working perfectly until I tried to do a couple of things from my wired PC across the wireless network......
My wired PC no longer sees the wireless Brother printer and therefore I cannot print.....my wife's wireless machine sees it and prints to it fine.
My wired PC can no longer connect to/see my wifes computer across the network..(for backup purposes)
I am sure this has something to do with the current default subnet I am on with my PC through the BGW320 (198.168.1.xx)
while everything else is being assigned by the Deco within the IP family of 192.168.68.xx
My questions are....
1) Is there something I can do in Router/Router mode with the IP address variables (BGW and/or Deco) to allow my PC to connect with everyone else
or
2) create singular subnet for everyone to talk on
or
3) If I take the BGW to Passthrough mode, will I still have the same issues connecting my PC to a lan port on the BGW?
TIA,
Bama
