@GlennJ0158 Not sure it is the same but for my BE95 they are combined together 2.4 & 5.  BUT if you use the Deco App and select Wi-Fi Settings  -> 2.4 GHz & 5 GHz Network -> Advanced -> Bands there is a check box one for 2.4 GHz and another for 5 GHz.  You can uncheck 5 GHz temporarily so only 2.4 GHz is broadcasted.  Then connect your Pixel to 2.4 GHz as needed.

  @jzchen 

Thank you. I found the setting and am testing now.

-Glenn

  @GlennJ0158 

It worked and the unit turned green, flashed, etc. When I put the network back into 5 & 2.4 the unit went dead.

I'm off for a week of skiing, so no progress will be made for a while.

Thanks again for the suggestion and it looks like a partial solution

-Glenn