Home

Forums

Stories

Knowledge Base

Home Network Community > Deco > BE85 wireless backhaul issue

< Deco

BE85 wireless backhaul issue

Elevenchicken

2024-11-25 20:07:15 - last edited Saturday

Posts: 3

Helpful: 1

Solutions: 1

Stories: 0

Registered: 2024-11-25

BE85 wireless backhaul issue

2024-11-25 20:07:15 - last edited Saturday

Tags: #Firmware Update #Backhaul Method #Client Devices #Feature Request

Model: Deco BE85

Hardware Version:

Firmware Version: 1.1.1 Build 20241023 Rel. 34667

Hi all,

I have updated my BE85 to the latest firmware (1.1.1 build 20241023). I also chose wireless network mode as optimal performace. However, when i click on my mesh node, it showed it connected by ethernet, 5GHz and 6GHz. I would like to know how i can also connected to the 2.4GHz?

And i also i am wondering, if there are any way i can hidden my IoT network?

Thanks a lot for helping

1 Accepted Solution

Elevenchicken

LV1

Saturday - last edited Saturday

Posts: 3

Helpful: 1

Solutions: 1

Stories: 0

Registered: 2024-11-25

Re:BE85 wireless backhaul issue-Solution

Saturday - last edited Saturday

yes i know. but apparently, once the ethernet cable is connected, 2.5Ghz will disconnect.. Thanks to the support, they found the way to connect, all 2.4, 5 and 6Ghz, also with ethernet. I will have to go 2.4Ghz band, and change from auto to any other frequency, then it will work.

Recommended Solution

2 Reply

yves_b

LV4

2024-11-26 12:51:33

Posts: 691

Helpful: 148

Solutions: 21

Stories: 0

Registered: 2023-03-26

Re:BE85 wireless backhaul issue

2024-11-26 12:51:33

@Elevenchicken The Deco will automatically decide the media it is using for the backhaul, you cannot control that.

Elevenchicken

LV1

Saturday - last edited Saturday

Posts: 3

Helpful: 1

Solutions: 1

Stories: 0

Registered: 2024-11-25

Re:BE85 wireless backhaul issue-Solution

Saturday - last edited Saturday

BE85 wireless backhaul issue

BE85 wireless backhaul issue

Information

Voters 1

Tags