BE24000 Weather and Temperature Slides not working, showing X outs.

BE24000 Weather and Temperature Slides not working, showing X outs.

BE24000 Weather and Temperature Slides not working, showing X outs.
BE24000 Weather and Temperature Slides not working, showing X outs.
a week ago - last edited a week ago
Tags: #Wi-Fi 7 #slides
Model: Archer BE900  
Hardware Version: V2
Firmware Version: 1.1.1 Build 20240929 rel.12298(5553)

My router's front display will correctly display the date and time, but the weather and temp slides show as an error (X's for the icons).  

My DNS is set to 8.8.8.8 and functioning and resolving correctly.  I've tried 1.1.1.1 and several others.  There is surprisingly little help on this topic in the TP link forums and on the internet in general.  I simply want the slides to show weather and data as intended. 

 

The only information displayed anywhere, happens to be on the touch screen that shows "Unable to load weather. Cloud service is unavailable. Please try again later."

 

Thanks in advance for any insight.

  0      
  0      
#1
Options
6 Reply
Re:BE24000 Weather and Temperature Slides not working, showing X outs.
Friday

Hi  @buttholio 

 

Welcome to the community!

 

We'd like to get this over to our engineers for you. Can you please provide the following information?

 

1. Who is your ISP?

 

2. Are the DNS settings you referenced configured in the Network -> Internet menu of the router's interface?

 

3. Please check whether you can access https://www.accuweather.com/ (the source used by the BE900 to update its weather info)

 

4. If the email you registered to the community forum with is not the same one registered for your TP-Link ID, please send me a private message with your TP-Link ID email address.

  0  
  0  
#2
Options
Re:BE24000 Weather and Temperature Slides not working, showing X outs.
Friday

  @Ryan 

Hello sir,

 

here are your answers:

 

Registered: 2018-11-01

Re:BE24000 Weather and Temperature Slides not working, showing X outs.

17 minutes ago

Hi  @buttholio 

 

Welcome to the community!

 

We'd like to get this over to our engineers for you. Can you please provide the following information?

 

1. Who is your ISP?

Verizon FiOs

2. Are the DNS settings you referenced configured in the Network -> Internet menu of the router's interface?

Yes

Primary DNS 8.8.8.8

Secondary DNS 8.8.4.4

 

3. Please check whether you can access https://www.accuweather.com/ (the source used by the BE900 to update its weather info)

Yes, can reach it, no problem there.

  0  
  0  
#3
Options
Re:BE24000 Weather and Temperature Slides not working, showing X outs.
Friday - last edited Friday

  @buttholio 

 

Thank you for the details!

 

Can you also please confirm whether the email address you signed up to the community with and the one you use to sign into your router are the same? This is important for us to ensure that we are addressing the correct account and can provide the necessary support.

 

Additionally, if possible, can you please export your router's configuration file and email it to USSupportTeam@TP-Link.com? This will allow our team to get the config info over to our engineers for further investigation. 

 

You can export the configuration file by visiting the router's Web UI, then navigating to Advanced > System > Backup & Restore > Back Up.

  0  
  0  
#4
Options
Re:BE24000 Weather and Temperature Slides not working, showing X outs.
Friday
 Yes, this email i signed up with is the correct one, it is the same email address. I've just emailed the router configuration file to USSupportTeam@TP-Link.com. Please let me know if you'd need anything else, or need me to try anything. Thanks
  0  
  0  
#5
Options
Re:BE24000 Weather and Temperature Slides not working, showing X outs.
Friday

  @buttholio 

 

Awesome, thank you.

 

I've forwarded all the information you've shared (including the config file) to our engineers for further analysis and will keep you posted.

  0  
  0  
#6
Options
Re:BE24000 Weather and Temperature Slides not working, showing X outs.
Yesterday

For those that find this issue as well, maybe this can help.  I worked with tp link engineers and tried a few things, and maybe its a bit buggy with the weather icon and temperature.  The fix for the temp was setting it through the tether app vice web gui, it did not work when set through the web gui.  As for the weather icon tile, it wasn't showing the correct weather type when the temp fixed through the tether app.    for example it was showing a partly sunny tile icon when it was night here.  Another issue they uncovered was that it wasn't updating the weather every hour as designed, so that needs to be fixed too.The latest news I have is that they'll address these issues, in firmware that will be coming in the future release.  I hope this helps and helps others avoid some frustration.

  1  
  1  
#7
Options