Low Speed on RE200 Acces Point Mode

usamarslan

2024-10-06 21:49:47

Posts: 1

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2024-10-06

Low Speed on RE200 Acces Point Mode

2024-10-06 21:49:47

Tags: #Access Point Mode

Hello,

I got RE200 to extend my wifi with strong signal on the other side of my house, which is 15 meters away. I plugged an ethernet cable from my main modem to this extender, and set it up on access point mode. Speed on my modem is 500 mbps. I only get 90mbps on 5ghz mode of this extender. I had hoped once I connect an ethernet cable to this extender, it would allow me to use wifi speed close to 500mbps at the other side of my house. What am I doing wrong?

1 Reply

Ryan

2024-10-07 18:30:47

Posts: 229

Helpful: 38

Solutions: 6

Stories: 1

Registered: 2018-11-01

Re:Low Speed on RE200 Acces Point Mode

2024-10-07 18:30:47

Hi @usamarslan

Welcome to the community!

The RE200 is equipped with a Fast Ethernet (up to 100 Mbps) port. If your network source provides bandwidth greater than 100 Mbps over Ethernet, then I would suggest using either a Wi-Fi Extender that is equipped with a Gigabit Ethernet port, or one of our Gigabit Ethernet Wi-Fi routers and configure it in Access Point Mode.

Check out the Latest: Getting Started with EasyMesh and TP-Link New Tablet Mode for the Tapo App Comparing the Latest Tapo Doorbells

Low Speed on RE200 Acces Point Mode

Low Speed on RE200 Acces Point Mode

Information

Voters 0

Tags