Want to incorporate BE550 to my network
Re:Want to incorporate BE550 to my network
If your Linksys MR7500 is configured in bridge mode probably that's even better, cause you can use BE550 full potential as a main router.
The easiest way to check if that the case is to check your BE550 WAN port (Internet) IP address:
If this IP address matches your public IP address (open in a web browser https://ping.eu/ to check it) then Linksys MR7500 is in bridge mode and BE550 should be configured in wireless router mode.
If that's not the case then BE550 should be configured in AP mode so you can avoid double NAT in your local network.
If this was helpful click on the arrow pointing upward to make it blue.
If this solves your issue, click the star to make it blue and mark the post as a "Recommended Solution".