BE63 USB - Can not enable in Deco app
I am attempting to use a USB drive plugged into a BE63 on my Deco network. When I navigate to More>Advanced, the "USB Sharing" does not show. I have tried a few different drives (both USB and Hard drive in a docking station) to no avail. I did find see that the drive must be FAT32 or exFAT so I specifically formatted a small thumb drive as exFAT and tried that. The app never shows me the option to enable USB Sharing. I do not know if this is important, but the mesh network has several different types of deco nodes on it. The types and versions are as follows in case it is relevant: one or more of the following nodes.
X55(1.0) 1.5.5 Build 20240718 Rel. 44414
X60(2.0) 1.5.3 Build 20231227 Rel. 62665
X60(4.0) 1.5.5 Build 20240718 Rel. 44414
BE63(2.0) 1.0.6 Build 20240724 Rel. 12326
Everything appears to be updated and I have checked both the app as well as the master node (check for upgrades). All seems correct. Am I missing something simple?
It is also suggested to remove BE63 from the APP(or reset the satellite BE63 by holding the reset pinhole for 1s), then click "Replace Main Deco", such as
How to replace the main Deco with another Deco-Case 2
Best regards.