tplink deco m5 isp firmware to normal/retail firmware
Hello
So I bought some second hand tplink deco m5 and they are ISP firmware. How do I get out of ISP firmware v2.5.9 and back to normal firm v1.7.8?
I tried downloading all the us v1,v2,v3,v3.xx and uk versions but they all fail to upgrade to the normal firmware.
Thanks
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
I have no idea if this will work since the firmware on your deco was provided by the former ISP but have you tried factory resetting the deco unit?
To factory reset a TP-Link Deco M5 mesh router, you can press and hold the Reset button on the bottom of the device for one second:
Press and hold the Reset button for one second
Release the button
You can also reset your Deco M5 through the Deco app:
Go to the Network page in the app
Tap the network map
Tap the Deco unit you want to reset
Tap the button in the top right corner
- Copy Link
- Report Inappropriate Content
I have no idea if this will work since the firmware on your deco was provided by the former ISP but have you tried factory resetting the deco unit?
To factory reset a TP-Link Deco M5 mesh router, you can press and hold the Reset button on the bottom of the device for one second:
Press and hold the Reset button for one second
Release the button
You can also reset your Deco M5 through the Deco app:
Go to the Network page in the app
Tap the network map
Tap the Deco unit you want to reset
Tap the button in the top right corner
- Copy Link
- Report Inappropriate Content
Just tried that no good. I guess i will stick with whatever I have. Thanks for the help though.
HelpFixDecoApp wrote
I have no idea if this will work since the firmware on your deco was provided by the former ISP but have you tried factory resetting the deco unit?
To factory reset a TP-Link Deco M5 mesh router, you can press and hold the Reset button on the bottom of the device for one second:
Press and hold the Reset button for one second
Release the button
You can also reset your Deco M5 through the Deco app:
Go to the Network page in the app
Tap the network map
Tap the Deco unit you want to reset
Tap the button in the top right corner
- Copy Link
- Report Inappropriate Content
There "might" be another way to get this to work
Go to https://www.tp-link.com/us/support/download/deco-m5/v1/#Firmware
Make sure you grab the right firmware version that matches your hardware version and unzip it.
Enter the deco web UI by typing "tplinkdeco.net" in the browser, then go to Advanced>System>Firmware Update, click browser and select the firmware bin file, then click on upgrade.
- Copy Link
- Report Inappropriate Content
This is definitely the correct answer. From the app, you can only have the system check and do an automatic Firmware upgrade. But if you log into your deco unit from a web browser; e.g. 192.168.1.1 or whatever the LAN gateway address is to the deco router, you can MANUALLY do a firmware upgrade and point to the file you have downloaded.
If this doesn't work, then it is possible that the ISP contracted with TP-LINK to provide a router with proprietary firmware. There are ways to get around it, but you're probably not going to find that answer here. You'll need to hack it.
But I would bet with 98% certainty, that you can manually install the firmware from your web browser if your deco is up and operational. If it's not operational, you can plug a laptop directly into it and get the gateway address by doing an IPCONFIG on your laptop. Then as said, log into the router and install the firmware you downloaded.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 305
Replies: 4
Voters 0
No one has voted for it yet.