Setting Up VLan's
I am wanting to setup 3 different VLan's on my home network and recently purchased a TP Link TL-SG1210MPE managed switch to do this. I have an ethernet cable running from my Deco into the switch and then have everything connected to the switch. What do I need to do in the Deco app in order to set this up?
Thanks,
Mark
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@MAW There are many different ways to setup VLANs.
What do you want to achieve?
- Copy Link
- Report Inappropriate Content
I was wanting to setup 1 VLAN as my main network where my PC, Synology NAS, phones, tablets exist. Then setup another VLAN as a Guest Network for when I have guest over. And then another one for all of my IOT devices to keep them separate. One concern I have now is that my Arlo camera hub and and Philips Hue light hub are wired connected to my Deco XE75 Pro router and cannot be connected to a wireless network. I see that the XE75 Pro has an IOT Network but when trying to connect my other IOT devices such as Simplisafe base station and thermostat, they do recognize the IOT network.
- Copy Link
- Report Inappropriate Content
@MAW I understand Deco has its own method to segregate main, guest and IOT network.
I believe all devices wired into the Deco are on the main network.
The Deco are using a specific VLAN for the guest network, your switch will have to support that VLAN on the ports used between Decos.
- Copy Link
- Report Inappropriate Content
Do I need to change any settings on the Deco to be able to setup a VLAN on my switch?
- Copy Link
- Report Inappropriate Content
@MAW I believe the Deco must be connected to an untagged port, and you have nothing to configure on the Deco.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 234
Replies: 5
Voters 0
No one has voted for it yet.