I added a Deco XE95 to my system of 2 XE75's recently and have had problems making it the Main Deco unit. My thinking is to have the BE95 as the Main and the 2 XE75's as satellite units. When trying to replace the current Main XE75 with it, I get no internet connection to it, and therefore none to the XE75s. I reset it back with the same XE75 as the main and simply added the BE95 as another satellite and all works well, but this is not how I wanted the arrangement for maximum throughput and efficiency. I tried a second time after all 3 units were running properly by selecting the BE95 and selecting the option Set as Main Deco. Again, no network connection. I have tried it with the modem output running to the XE75 designated as Main and an ethernet connection from it to the BE95 as well as having the moded connected directly to the BE95. No difference. Any suggestions on how to get the BE95 to run as the Main Deco unit?