Not getting 2GB on TL-SG108-M2

Not getting 2GB on TL-SG108-M2

Not getting 2GB on TL-SG108-M2
Not getting 2GB on TL-SG108-M2
2024-07-06 17:16:15
Tags: #TL-SG108-M2
Model: TL-SG108-M2  
Hardware Version:
Firmware Version:

Hello,

 

I have the  TL-SG108-M2 8 port switch and can't seem to get any connection speed over 900mbps.  I have the BE9300 as my router which connects to my switch.  When I try my connection speed using the ethernet cable used from my router to the switch I get over 2Gbps.  I tried switching different cables and ports from the switch to my desktop and never goes above the 900mbps.  Is there any other setting I need to do or firmware upgrade?  Thanks. 

  0      
  0      
#1
Options
1 Reply
Re:Not getting 2GB on TL-SG108-M2
2024-07-09 20:45:35

  @darnoc23 

 

TL-SG108-M2 is an unmanaged switch - it's a plug and play - there's no settings there.

You can check the negotiated speed between your BE9300 and the swicth from the router's WebGUI here:

 

d271ba08ad534c47a6be4ac2c847f7c6

 

If the speed is correct then the issue is probably due to bad cabling or desktop network card capabilities / drivers.

It's mandatory to use a good quality cables (Cat 6) and make sure that you're with the latest desktop network card drivers.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  0  
  0  
#2
Options