Home Network Community > Deco > Deco X55 only displays smart device clients
< Deco

Deco X55 only displays smart device clients

Deco X55 only displays smart device clients

Deco X55 only displays smart device clients
Deco X55 only displays smart device clients
2024-06-30 18:52:40
Model: Deco X55  
Hardware Version:
Firmware Version: 1.5.1

I've noticed that sometimes the client list only displays the Kasa smart IoT devices but not any other connected devices. It seems to have started to do this after the firmware update that let the device look up the manufacturer information for connected devices. Note that all clients are still connected, they're just not showing up on the list. This includes non-Kasa brand smart bulbs I have. 
 

I'm only using one WiFi network for all devices and I have a few satellite routers connected through a managed switch. I'm guessing this is a bug in the new firmware but would appreciate any advice. 

  3      
 
  3      
 
#1
Options
9 Reply
Re:Deco X55 only displays smart device clients
2024-07-01 07:28:54

  @TJS89 

Hi, Thank you very much for the feedback.

Could you please refer to this link to help me submit the Deco APP log here:

How to submit Deco APP log

 

Can you also send some pictures of your network map on the Deco APP, such as:

f2bc2c3272b7433fac34e1c58b0f9d68

Wait for your reply and best regards.

▶Check What's Currently Going on With Deco ▶Deco BE11000/ BE63_V2.6_1.1.7 Ready for Test ▶Deco BE25_V1_1.0.17 Ready for Test! ▶Update Deco BE65 Pro to the Latest 1.1.3 Firmware Now! Try to leave a Message if urgent help is required.
  0  
  0  
#2
Options
Re:Deco X55 only displays smart device clients
2024-07-01 12:47:56

6f3f5f2130eb44238996b3bda81a3e15  @David-TP sent an email with the logs and some screenshots. I forgot to attach the network map so I've added that here. Note all satellite Decos are attached by Ethernet backhaul through managed switches, but they have been this way for awhile and the client list was populated correctly beforehand. 
 

 

  1  
  1  
#3
Options
Re:Deco X55 only displays smart device clients
2024-07-02 01:58:30

  @TJS89 

Hi, Thank you very much and the log has been received.

It has been forwarded to the senior engineers for further assistance. Please check the email later for more suggestions.

By the way, may I know how many online clients you have connected to the Deco Mesh system?

Wait for your reply and best regards.

 

▶Check What's Currently Going on With Deco ▶Deco BE11000/ BE63_V2.6_1.1.7 Ready for Test ▶Deco BE25_V1_1.0.17 Ready for Test! ▶Update Deco BE65 Pro to the Latest 1.1.3 Firmware Now! Try to leave a Message if urgent help is required.
  0  
  0  
#4
Options
Re:Deco X55 only displays smart device clients
2024-10-20 09:16:27

  @David-TP having this same issue on X55 and X50 Outdoor network. Seeing 1 online client which is a TP Link switch. Was working fine with 50-60 listed clients earlier in the morning. 
 

Can't update firmware as not had the push and can't access web portal. 
 

Devices all functioning thankfully. 

  0  
  0  
#5
Options
Re:Deco X55 only displays smart device clients
2024-10-20 15:53:21

  @Chalet76 

 

Are you trying to access the web ui via the IP or the web link? 

 

http://tplinkdeco.net

 

When you try either by the IP or the web ui are you getting any error messages? 

Need help with the Deco app, setup, Ethernet backhaul, network switch or rolling back firmware? https://community.tp-link.com/us/home/forum/topic/699816?page=1
  0  
  0  
#6
Options
Re:Deco X55 only displays smart device clients
2025-01-13 21:38:41

  @TJS89 I am having this same issue. I have 30 connected devices and the app only shows 8 connected and they are all Kasa devices (smart plugs, bulbs etc...) None of my other 20+ devices show up in the Deco app even though they are all online. My Deco X55 system is only about 1 month old. It consists of 3 X55 Decos. If I reboot everthing the Deco app will show all 30 connected devices but after a few hours or a day it will go back to just showing the 8. This only started after the most recent firmware update.

  0  
  0  
#7
Options
Re:Deco X55 only displays smart device clients
2025-01-13 23:50:46

  @Jaspo 

I have exactly the same issue, 8 tp-link outlets/lights  showing, should be about 35 devices. Three X 55 units, 1 main to router, 2 wifi slaves. If I reboot I see them all, later only 8.

  0  
  0  
#8
Options
Re:Deco X55 only displays smart device clients
2025-01-14 00:56:15

  @TJS89 I also had the same situation with the Deco X50 vs Deco M5

  0  
  0  
#9
Options
Re:Deco X55 only displays smart device clients
2025-02-13 20:00:03

  @Jaspo 

 

Jaspo wrote

  @TJS89 I am having this same issue. I have 30 connected devices and the app only shows 8 connected and they are all Kasa devices (smart plugs, bulbs etc...) None of my other 20+ devices show up in the Deco app even though they are all online. My Deco X55 system is only about 1 month old. It consists of 3 X55 Decos. If I reboot everthing the Deco app will show all 30 connected devices but after a few hours or a day it will go back to just showing the 8. This only started after the most recent firmware update.

 

Your post fits my situation exactly.  I could have written it word for word.  You saved me the time.  I'm glad it's not just me or something I did.  So I guess I'll live with it until someone posts a fix, that works.

  1  
  1  
#10
Options

Information

Helpful: 3

Views: 739

Replies: 9

About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.