Home

Forums

Stories

Knowledge Base

Home Network Community > Adapters > Archer TX3000E Shows "This device cannot start (Code10)" in Device Manager (Windows 10)

< Adapters

Archer TX3000E Shows "This device cannot start (Code10)" in Device Manager (Windows 10)

dlipp

2024-06-22 16:33:33

Posts: 2

Helpful: 1

Solutions: 0

Stories: 0

Registered: 2024-06-22

Archer TX3000E Shows "This device cannot start (Code10)" in Device Manager (Windows 10)

2024-06-22 16:33:33

Tags: #Windows 10

Model: Archer TX3000E

Hardware Version: V1

Firmware Version:

Device is listed as "Intel(R) Wi-Fi 6 AX200 160MHz"

Installed driver version 22.180_230206 but any attempt to reinstall gets an error message "One or more issues cause the setup to fail. Please fix the issues and retry setup."

I'm unable to see networks with this device presently.

HW version is 1.6

2 Reply

dlipp

LV1

2024-06-30 05:53:36

Posts: 2

Helpful: 1

Solutions: 0

Stories: 0

Registered: 2024-06-22

Re:Archer TX3000E Shows "This device cannot start (Code10)" in Device Manager (Windows 10)

2024-06-30 05:53:36

I’m noticing that this isn’t the first thread like this on here but the others appear locked with no reply. Is there some other data I can provide here to help support tp-link in answering this?

DVair

LV2

2024-07-14 02:59:40

Posts: 71

Helpful: 14

Solutions: 1

Stories: 0

Registered: 2024-01-27

Re:Archer TX3000E Shows "This device cannot start (Code10)" in Device Manager (Windows 10)

2024-07-14 02:59:40

@dlipp Make sure your Windows 10 is totally updated, some adapters have an issue with older versions of 10.

Archer TX3000E Shows "This device cannot start (Code10)" in Device Manager (Windows 10)

Archer TX3000E Shows "This device cannot start (Code10)" in Device Manager (Windows 10)

Information

Voters 0

Tags