Home

Forums

Stories

Knowledge Base

Home Network Community > Range Extenders > WiFi devices connecting to AX10000 and not the RE715X Mesh Extender - Low signal strength

< Range Extenders

WiFi devices connecting to AX10000 and not the RE715X Mesh Extender - Low signal strength

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

WiFi devices connecting to AX10000 and not the RE715X Mesh Extender - Low signal strength

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Aussie_Z

2024-05-28 20:28:03 - last edited 2024-06-14 16:43:37

Posts: 5

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2020-11-30

WiFi devices connecting to AX10000 and not the RE715X Mesh Extender - Low signal strength

2024-05-28 20:28:03 - last edited 2024-06-14 16:43:37

Model: RE715X

Hardware Version: V1

Firmware Version: 1.0.11 Build 20230721 rel 34344

I read this https://community.tp-link.com/us/home/forum/topic/203466 but I am hoping that there is a newer/better answer by now.

I installed an Archer AX10000 and an RE715X Extender in a mesh configuration to ensure that two "delicate" (wrt WiFi signal strength) devices get a "high-powered" WiFi signal. The "delicate devices" are connecting to the AX10000 (at 66 feet and 56% signal strength thru numerous walls) instead of the Extender (at 22 feet an 82% direct line-of-sight).

What can I do to (force?) connect the devices to the Extender so they receive a strong WiFi signal and remain stable?

1 Accepted Solution

terziyski

LV7

2024-06-14 04:31:05 - last edited 2024-06-14 16:43:37

Posts: 7150

Helpful: 5390

Solutions: 1222

Stories: 7

Registered: 2013-10-12

Re:WiFi devices connecting to AX10000 and not the RE715X Mesh Extender - Low signal strength-Solution

2024-06-14 04:31:05 - last edited 2024-06-14 16:43:37

@Aussie_Z

There's no better answer than that you already saw.

You can lower AX10000 Advanced=>Wireless Settings=Ttransmit Power to Middle and check if there's any improvement.

If this was helpful click on the arrow pointing upward to make it blue. If this solves your issue, click the star to make it blue and mark the post as a "Recommended Solution".

Recommended Solution

2 Reply

terziyski

LV7

2024-06-14 04:31:05 - last edited 2024-06-14 16:43:37

Posts: 7150

Helpful: 5390

Solutions: 1222

Stories: 7

Registered: 2013-10-12

Re:WiFi devices connecting to AX10000 and not the RE715X Mesh Extender - Low signal strength-Solution

2024-06-14 04:31:05 - last edited 2024-06-14 16:43:37

@Aussie_Z

There's no better answer than that you already saw.

You can lower AX10000 Advanced=>Wireless Settings=Ttransmit Power to Middle and check if there's any improvement.

If this was helpful click on the arrow pointing upward to make it blue. If this solves your issue, click the star to make it blue and mark the post as a "Recommended Solution".

WiFi devices connecting to AX10000 and not the RE715X Mesh Extender - Low signal strength

WiFi devices connecting to AX10000 and not the RE715X Mesh Extender - Low signal strength

Information

Voters 0

Tags