@DecoMeshUser,

Normally behaviors such as this have to do with the device not supporting the mesh technologies seen in most networks.

There are a few settings that you toggle to see if there is a difference in stability:

- Disable Beamforming for the Device since it is likely not supported by the doorbell.

- Disable Mesh Technology for the Device as it will not be moving around.

- Lastly, If available to your network, try setting a connection preference for the doorbell, which will force a connection to a specific node(however I believe Mesh needs to be enabled for the device)

Let me know if these do not help since I believe that the beamforming feature has been the main culprit with doorbells in the past.